Equipment and Calibration History
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [26] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65| Ser No. | Date | Loc From | Title | Loc To | Notes |
|---|---|---|---|---|---|
| Mark I A000591 | 2018-12-04 | Lab none | Returned | Disposed none | Returned to Arable for post mortem on failed backup air temperature thermocouple |
| Mark I A001311 | 2019-04-25 | Lab none | Installed | Bouldin Alfalfa Weather Station B | Installed by Loreli and Mikaela from Arable for an inter-comparison experiment. |
| Mark I A001359 | 2019-04-25 | Lab none | Installed | Bouldin Corn Weather Station B | Installed by Loreli and Mikaela from Arable for inter-comparison experiment. |
| Mark I A001911 | 2019-06-20 | Bouldin Corn Weather Station A | Removed | Lab none | Removed from BC and brought back to the lab. There's nothing wrong with it, it was just the oldest of 3 Arables on the BC tower. |
| LI-7500A 0035 | 2019-11-19 | Lab none | Installed | Vaira Gas Analyzer CO2/H2O | Installed at Vaira to replace sn 75H-2180 for calibration. |
| LI-7500A 75H-2180 | 2019-11-19 | Vaira Gas Analyzer CO2/H2O | Removed | Lab none | Removed from Vaira for calibration. Replaced by sn 0035. |
| eosFD FD20180026 | 2019-11-19 | Lab none | Installed | Tonzi Forced Diffusion Open | Installed in the open at the Tonzi soil co2 profiles |
| eosFD FD20180068 | 2019-11-19 | Lab none | Installed | Tonzi Forced Diffusion Tree 1 | Installed under the tree at the Tonzi soil co2 profiles |
| GMP222 K1310102 | 2019-11-19 | Lab none | Installed | Tonzi CO2 Probe Open Profile -0.16 | Installed in the deepest (-16cm) location in the Open soil co2 profile to replace a 3% probe that was railed. This is a 1% probe. |
| GMT221 G0150037 | 2019-11-19 | Tonzi CO2 Probe Open Profile -0.16 | Removed | Lab none | Removed from the deepest (-16cm) location in the Open soil co2 profile because its measurement was railed. This is a 3% probe and was replaced by a 1% probe. |
| TS01 TS01-001 | 2019-11-19 | Tonzi | Removed | Lab none | Removed from near the Floor solar panels. This sensor was looking at the grass. Ana needed its narrow FOV for her emissivity testing in the lab. |
| LI-7500A 0418 | 2019-11-19 | Lab none | Installed | Tonzi-Floor Gas Analyzer CO2/H2O | Installed on Tonzi Floor after testing and calibration in the lab. |
| LI-7500A 75H-2182 | 2019-11-19 | Lab none | Installed | Tonzi-Tower Gas Analyzer CO2/H2O | Installed at Tonzi to replace sn 0065 for calibration. |
| LI-7500A 0065 | 2019-11-19 | Tonzi-Tower Gas Analyzer CO2/H2O | Removed | Lab none | Removed from Tonzi Tower for calibration. Replaced by sn 75H-2182. |
| LI-7500A 75H-2176 | 2019-11-14 | Lab none | Installed | Bouldin Alfalfa Gas Analyzer CO2/H2O | Installed at BA to replace sn 75H-2150, which was brought back to the lab for calibration. |
| LI-7500A 75H-2150 | 2019-11-14 | Bouldin Alfalfa Gas Analyzer CO2/H2O | Removed | Lab none | Removed from BA and brought back to the lab for calibration. It was replaced by 75H-2176. |
| LI-7500A 0041 | 2019-11-14 | Lab none | Installed | East Pond Gas Analyzer CO2/H2O | Installed at East Pond to replace sn 0035 for calibration. |
| LI-7500A 0035 | 2019-11-14 | East Pond Gas Analyzer CO2/H2O | Removed | Lab none | Removed from East Pond and brought back to the lab for calibration. Replaced by sn 0041. |
| LI-7500A 0042 | 2019-11-14 | Lab none | Installed | Bouldin Corn Gas Analyzer CO2/H2O | Installed at Bouldin Corn to replace sn 75H-2669 for calibration. |
| LI-7500A 75H-2669 | 2019-11-14 | Bouldin Corn Gas Analyzer CO2/H2O | Removed | Lab none | Removed from Bouldin Corn and brought back to lab for calibration. Replaced by sn 0042. |
| TE525MM 49187-109 | 2019-11-19 | Sherman Barn Precipitation | Tested | Sherman Barn Precipitation | Plug tipping bucket into the calibration CR23x and dripped 475ml of water through the bucket which should result in 100tips. Got 104 tips and turned both set screws 1/2 turn CCW. |
| HMP45AC U3030041 | 2019-11-19 | Sherman Barn RH & Temp | Removed | Lab none | Removed from SB and brought back to the lab for further testing. This sensor had some spikes in late September and starting mid-Nov hovered around 2degC. |
| TE525MM 65552-615 | 2019-11-19 | Sherman Wetland Precipitation | Tested | Sherman Wetland Precipitation | Plug tipping bucket into the calibration CR23x and dripped 475ml of water through the bucket which should result in 100tips. Got 100 tips and did not adjust the bucket. |
| WMP 1352 000021 | 2019-11-18 | Loaned | Returned | Lab none | This sensor was returned from Whendee's lab some time ago but no note was entered at the time. I have confirmed it is currently of the shelf above Daphne's desk in the lab. |
| PA-II-SD 84f3ebd5ffb1 | 2019-11-14 | Lab none | Loaned | Loaned | Loaned to Tomo Yoshino and friends for undergraduate project looking at air quality in BART stations. |
| LI-7500A 0418 | 2019-11-18 | Lab none | Calibration | Lab none | Last calibration: 2019-08-21 AGC=94.4 SDM=0 DAC1=- DAC2=- Ambient P=100.4kPa, Tair=25.2C, Tdew=8.5C Zero Air at 950psi, AMP CA04396 408.97 at 600 Tdewspan=20.0 CO2 zero 0.899 -> 0.8991 Offset: 0.35ppm CO2 span 0.9976 -> 0.9988 Offset: -0.72ppm H2O zero 0.8466 -> 0.8482 Offset: 9.4ppm H2O span 0.9818 -> 0.9812 Offset: 0.03ppm Notes: Removed from Vaira due to no readings but has test fine in the lab - no missing data in about a week. |
| LI-7500A 75H-2182 | 2019-11-18 | Lab none | Calibration | Lab none | Last calibration: 2019-08-01 AGC=100.0 SDM=0 DAC1=- DAC2=- Ambient P=100.3kPa, Tair=27.5C, Tdew=9.64C Zero Air at 950psi, AMP CA04396 408.97 at 600 Tdewspan=20.0 CO2 zero 0.8846 -> 0.8846 Offset: -0.05ppm CO2 span 1.0226 -> 1.0217 Offset: 0.33ppm H2O zero 0.8456 -> 0.8462 Offset: 3.6ppm H2O span 1.0214 -> 1.0265 Offset: -0.1ppm Notes: |
| LI-7500A 0035 | 2019-11-18 | Lab none | Calibration | Lab none | Last calibration: 2019-08-01 AGC=100.1 SDM=0 DAC1=- DAC2=- Ambient P=100.4kPa, Tair=26.4C, Tdew=10.0C Zero Air at 950psi, AMP CA04396 408.97 at 600 Tdewspan=20.0 CO2 zero 0.9374 -> 0.9374 Offset: 0.0ppm CO2 span 1.0207 -> 1.0170 Offset: 1.93ppm H2O zero 0.8984 -> 0.8980 Offset: -2.6ppm H2O span 1.0323 -> 1.0314 Offset: 0.03ppm Notes: by Joe |
| LI-7500A 0418 | 2019-11-13 | Lab none | Tested | Lab none | Ran overnight in the lab on the bench and the 30-minute data looked fine for CO2 and H2O. I'll let it run for a few more days in a sunny window. |
| LI-7500A 75H-2176 | 2019-11-13 | Lab none | Calibration | Lab none | Last calibration: 2019-07-24 AGC=99.5 SDM= DAC1= DAC2= Ambient P=100.5kPa, Tair=25.6C, Tdew=11.4C Zero Air at 900psi, AMP CA4396 408.97 at 650 Tdewspan=16.00 CO2 zero 0.8672 -> .8675 Offset: 1.36ppm CO2 span 1.0061 -> 1.0072 Offset: -.67ppm H2O zero 0.8521 -> .8520 Offset: -1.0ppm H2O span 0.9182 -> .9123 Offset: .13ppm Notes: Did an initial calibration yesterday using config file 2019-07-24, but it had a large H2O zero offset (-35.7 mmol/m3) and H2O span offset (1.53C). Today I did another calibration, again from the config file 2019-07-24. Today the H2O offset/span seem ok, so not sure what was happening yesterday. I saved today's new config file and deleted yesterday's to avoid confusion. |
| LI-7500A 75H-2667 | 2019-11-12 | Lab none | Calibration | Lab none | Last calibration: 2019-07-24 AGC=101.4 SDM= DAC1= DAC2= Ambient P=100.7kPa, Tair=26.2C, Tdew=10.9C Zero Air at 950psi, AMP CA4396 408.97 at 700 Tdewspan=16.00 CO2 zero 0.9413 -> .9419 Offset: 2.32ppm CO2 span 1.0158 -> 1.019 Offset: -1.67ppm H2O zero 0.8363 -> .8384 Offset: 12.8ppm H2O span 1.0222 -> 1.0239 Offset: -.03ppm Notes: |
| LI-7500A 0042 | 2019-11-12 | Lab none | Calibration | Lab none | Last calibration: 2019-07-24 AGC=99.5 SDM= DAC1= DAC2= Ambient P=100.5kPa, Tair=26.7C, Tdew=11.3C Zero Air at 950psi, AMP CA4396 408.97 at 700 Tdewspan=16.00 CO2 zero 0.9481 -> .9481 Offset: .26ppm CO2 span 1.0049 -> 1.0091 Offset: -2.31ppm H2O zero 0.8433 -> .8449 Offset: 10.0ppm H2O span 1.0179 -> 1.0139 Offset: .08ppm Notes: |
| LI-7500A 0041 | 2019-11-12 | Lab none | Calibration | Lab none | Last calibration: 2019-07-24 AGC=99.0 SDM= DAC1= DAC2= Ambient P=100.5kPa, Tair=27.5C, Tdew=12.8C Zero Air at 950psi, AMP CA4396 408.97 at 700 Tdewspan=16.00 CO2 zero 0.997 -> .9968 Offset: -.88ppm CO2 span 1.0163 -> 1.0146 Offset: .65ppm H2O zero 0.8201 -> .8218 Offset: 9.6ppm H2O span 1.0243 -> 1.0267 Offset: -.05ppm Notes: |
| LI-7500A 75H-2180 | 2019-11-07 | Tonzi-Floor Gas Analyzer CO2/H2O | Installed | Vaira Gas Analyzer CO2/H2O | Installed on Vaira to replace sn 0418 that failed probably due to bad source or detector. |
| LI-7500A 0418 | 2019-11-07 | Vaira Gas Analyzer CO2/H2O | Removed | Lab none | Removed from Vaira due to failure - probably bad source or detector. Replaced by sn 75H-2180 from Tonzi Floor. |
| LI-7500A 75H-2180 | 2019-11-07 | Tonzi-Floor Gas Analyzer CO2/H2O | Removed | Vaira Gas Analyzer CO2/H2O | Removed from Tonzi Floor for use at Vaira where the 7500 head had died probably with a bad source or detector. |
| TE525 48102-611 | 2019-11-07 | Tonzi | Calibration | Tonzi | Plug tipping bucket into the calibration CR23x and dripped 475ml of water through the bucket which should result in 100tips. Got 103 tips and did not adjust the bucket. |
| TE525 48132-611 | 2019-11-07 | Tonzi | Calibration | Tonzi | Plug tipping bucket into the calibration CR23x and dripped 475ml of water through the bucket which should result in 100tips. Got 103 tips and did not adjust the bucket. |
| LI-7700 TG1-0100 | 2010-09-21 | Twitchell Rice Gas Analyzer CH4 | Removed | Lab none | Removed from the Twitchell Rice tower for zero flux experiment at Moffett Field |
| LI-7500A 75H-2514 | 2019-10-31 | Lab none | Installed | East End Gas Analyzer CO2/H2O | Installed at East End to replace sn 75H-2176 for calibration. |
| LI-7500A 75H-2176 | 2019-10-31 | East End Gas Analyzer CO2/H2O | Removed | Lab none | Removed from East End for calibration. Replaced by sn 75H-2514. |
| LI-7500A 1594 | 2019-10-31 | Lab none | Installed | Mayberry Gas Analyzer CO2/H2O | Installed at Mayberry to replace sn 0042 for calibration. |
| LI-7500A 0042 | 2019-10-31 | Mayberry Gas Analyzer CO2/H2O | Removed | Lab none | Removed from Mayberry for calibration. Replaced by sn 1594. |
| TE525MM 65552-615 | 2019-10-31 | Sherman Wetland Precipitation | Tested | Sherman Wetland Precipitation | We tested the rain bucket but got 124 tips when we should have had 100. Spider webs on the tipper might have been the problem. The webs were cleaned out but it needs to be retested. |
| LI-7500A 0073 | 2019-10-31 | Lab none | Installed | Sherman Wetland Gas Analyzer CO2/H2O | Installed at Sherman Wetland to replace sn 0041 for calibration. |
| LI-7500A 0041 | 2019-10-31 | Sherman Wetland Gas Analyzer CO2/H2O | Removed | Lab none | Removed from Sherman Wetland for calibration. Replaced by sn 0073. |
| TE525MM 49187-109 | 2019-10-31 | Sherman Barn Precipitation | Calibration | Sherman Barn Precipitation | After cleaning the tipping bucket we connected it to a CR23x and dripped 475ml of water through the bucket which should result in 100tips. We got 90 tips. We turned its set screws two full rotations CW. |
| LI-7500A 75H-2668 | 2019-10-31 | Lab none | Installed | Sherman Barn Gas Analyzer CO2/H2O | Installed at Sherman Barn to replace sn 75H-2667 for calibration. |
| LI-7500A 75H-2667 | 2019-10-31 | Sherman Barn Gas Analyzer CO2/H2O | Removed | Lab none | Removed from Sherman Barn for calibration. Replaced by sn 75H-2668. |
| LI-7700 TG1-0357 | 2019-10-31 | Sherman Barn Gas Analyzer CH4 | Calibration | Sherman Barn Gas Analyzer CH4 | Calibration Location: Sherman Barn Last calibration: 2019-04-11 RSSI=68%, Optical RH=8% Ambient P=102.8kPa, Tair=12.1C Zero Air at 1000psi, AMP CA03923 3.121 at 1050 CH4 Zero Offset: 0.020ppm CH4 Span Offset: -0.011ppm Notes: Power was out earlier this week. |
| LI-7700 TG1-0424 | 2019-10-31 | Sherman Wetland Gas Analyzer CH4 | Calibration | Sherman Wetland Gas Analyzer CH4 | Calibration Location: Sherman Wetland
Last calibration: 2019-04-11 RSSI=78%, Optical RH=19% Ambient P=102.4kPa, Tair=18.1C Zero Air at 1000psi, AMP CA03923 3.121 at 1000 CH4 Zero Offset: 0.005ppm CH4 Span Offset: 0.005ppm Notes: Zero had random large spikes that turned out to be a tiny insect crawling around the bottom mirror - removed before span. Otherwise, very tight calibration. |
| LI-7500A 75H-2514 | 2019-10-30 | Lab none | Calibration | Lab none | Last calibration: 2019-04-22 AGC=100.0 SDM=0 DAC1=- DAC2=- Ambient P=102.6kPa, Tair=26.18C, Tdew=-11.5C Zero Air at 900psi, AMP CA04396 408.97 at 800 Tdewspan=20.0 CO2 zero 0.905 -> 0.9047 Offset: -1.15ppm CO2 span 1.01 -> 1.0064 Offset: 1.83ppm H2O zero 0.8389 -> 0.8391 Offset: 1.0ppm H2O span 1.0155 -> 1.0156 Offset: 0.01ppm Notes: Ambient air was very dry. Reset SS from 102.2. Joe |
| LI-7500A 75H-2668 | 2019-10-30 | Lab none | Calibration | Lab none | Last calibration: 2019-04-26 AGC=100.3 SDM=0 DAC1=- DAC2=- Ambient P=101.0kPa, Tair=26.9C, Tdew=-10.7C Zero Air at 900psi, AMP CA04396 408.97 at 800 Tdewspan=20.0 CO2 zero 0.9391 -> 0.9393 Offset: 1.05ppm CO2 span 1.0169 -> 1.0160 Offset: 0.53ppm H2O zero 0.9069 -> 0.9096 Offset: -0.9ppm H2O span 1.0139 -> 1.0143 Offset: 0ppm Notes: Ambient air was very dry. Joe |
| LI-7500A 1594 | 2019-10-30 | Lab none | Calibration | Lab none | Last calibration: 2019-04-26 AGC=99.6 SDM=0 DAC1=- DAC2=- Ambient P=100.9kPa, Tair=24.6C, Tdew=-11.9C Zero Air at 900psi, AMP CA04396 408.97 at 800 Tdewspan=20.0 CO2 zero 0.8646 -> 0.8646 Offset: -0.3ppm CO2 span 1.0178 -> 1.0166 Offset: 0.53ppm H2O zero 0.8868 -> 0.8895 Offset: -1.7ppm H2O span 1.0026 -> 0.9958 Offset: 0.18ppm Notes: Ambient air was very dry. Joe |
| LI-7500A 0073 | 2019-10-30 | Lab none | Calibration | Lab none | Last calibration: 2019-08-14 AGC=99.6 SDM=0 DAC1=- DAC2=- Ambient P=101.0kPa, Tair=27.45C, Tdew=-10.8C Zero Air at 900psi, AMP CA04396 408.97 at 800 Tdewspan=20.0 CO2 zero 0.9576 -> 0.9574 Offset: -0.70ppm CO2 span 1.0095 -> 1.0091 Offset: 0.23ppm H2O zero 0.7318 -> 0.7311 Offset: -4.6ppm H2O span 1.0247 -> 1.0052 Offset: 0.4ppm Notes: Ambient air was very dry. Joe |
| TE525 48130-611 | 2019-10-24 | Tonzi | Calibration | Tonzi | I connected the bucket to a CR23x dripping 475ml of water through the bucket which should result in 100tips. I got 104 tips. I did not adjust it. |
| TR-525I-R1 24872-999 | 2019-10-24 | Tonzi | Calibration | Tonzi | I connected the bucket to a CR23x dripping 475ml of water through the bucket which should result in 100tips. I got 100 tips. |
| TR-525I-R1 24875-999 | 2019-10-24 | Vaira Precipitation | Calibration | Vaira Precipitation | I connected the tipping bucket to a CR23x and dripped 475ml of water through the bucket which should result in 100tips. We got 103 tips. I did not adjust it. |
| TR-5251 40415-1006 | 2019-10-22 | Mayberry Precipitation | Calibration | Mayberry Precipitation | Initially, the ground wire at the data logger was broken. After cleaning the tipping bucket we connected it to a CR23x and dripped 475ml of water through the bucket which should result in 100tips. We got 109 tips. We turned its set screw to full rotations CCW. Retest on 10-31 got 102 tips - good enough. |
| TR-525M 50229-112 | 2019-10-22 | East End Precipitation | Calibration | East End Precipitation | After cleaning the tipping bucket we connected it to a CR23x and dripped 475ml of water through the bucket which should result in 100tips. We got 96 tips – we did not adjust it. |
| TE525MM 65560-615 | 2019-10-22 | Bouldin Alfalfa Precipitation | Calibration | Bouldin Alfalfa Precipitation | After cleaning the tipping bucket we connected it to a CR23x and dripped 475ml of water through the bucket which should result in 100 tips. We got 103 tips – no adjustment needed. |
| TE525MM 65548-615 | 2019-10-22 | Bouldin Corn Precipitation | Calibration | Bouldin Corn Precipitation | After cleaning the tipping bucket we connected it to a CR23x and dripped 475ml of water through the bucket which should result in 100tips. We got 99 tips – no adjustment needed. |
| LI-7700 TG1-0223 | 2019-10-22 | Mayberry Gas Analyzer CH4 | Calibration | Mayberry Gas Analyzer CH4 | Calibration Location: Mayberry Last calibration: 2019-04-25 RSSI=84.7%, Optical RH=28% Ambient P=101.6kPa, Tair=29.7C Zero Air at 1200psi, AMP CA03923 3.121 at 1200 CH4 Zero Offset: -0.075ppm CH4 Span Offset: 0.007ppm Notes: Slightly larger zero offset but span seems good. After calibration swapped optics desiccant and dried head space with cal gas. New RH 11%. |
| LI-7700 TG1-0423 | 2019-10-22 | East End Gas Analyzer CH4 | Calibration | East End Gas Analyzer CH4 | Calibration Location: East End Last calibration: 2019-04-11 RSSI=83%, Optical RH=17% Ambient P=102.0kPa, Tair=24.6C Zero Air at 1300psi, AMP CA03923 3.121 at 1400 CH4 Zero Offset: 0.023ppm CH4 Span Offset: -0.001ppm Notes: |
| LI-7700 TG1-0211 | 2019-10-22 | East Pond Gas Analyzer CH4 | Calibration | East Pond Gas Analyzer CH4 | Calibration Location: East Pond Last calibration: 2019-04-11 RSSI=72%, Optical RH=19% Ambient P=101.9kPa, Tair=26.1C Zero Air at 1300psi, AMP CA03923 3.121 at 1200 CH4 Zero Offset: 0.003ppm CH4 Span Offset: -0.001ppm Notes: |
| LI-7700 TG1-0224 | 2019-10-22 | West Pond Gas Analyzer CH4 | Calibration | West Pond Gas Analyzer CH4 | Calibration Location: West Pond Last calibration: 2019-04-11 RSSI=72%, Optical RH=27% Ambient P=101.8kPa, Tair=27.2C Zero Air at 1300psi, AMP CA03923 3.121 at 1200 CH4 Zero Offset: 0.043ppm CH4 Span Offset: 0.000ppm Notes: Was stabilizing at 0.033 for zero but went up after adjusting gas flow. Optics desiccant swapped after calibration. Cal gas used to dry head space. New RH about 10% |
| LI-7700 TG1-0421 | 2019-10-22 | Bouldin Alfalfa Gas Analyzer CH4 | Calibration | Bouldin Alfalfa Gas Analyzer CH4 | Calibration Location: Bouldin Alfalfa Last calibration: 2019-04-11 RSSI=84%, Optical RH=22% Ambient P=101.8kPa, Tair=20.9C Zero Air at 1300psi, AMP CA03923 3.121 at 1400 CH4 Zero Offset: 0.022ppm CH4 Span Offset: 0.001ppm Notes: Swapped optics desiccant after calibration using cal gas to dry head space. New RH 7% |
| LI-7700 TG1-0155 | 2019-10-22 | Bouldin Corn Gas Analyzer CH4 | Calibration | Bouldin Corn Gas Analyzer CH4 | Calibration Location: Bouldin Corn Last calibration: 2019-04-11 RSSI=89.5%, Optical RH=26% Ambient P=102.1kPa, Tair=17.2C Zero Air at 1350psi, AMP CA03923 3.121 at 1400 CH4 Zero Offset: 0.024ppm CH4 Span Offset: -0.005ppm Notes: Light breeze, swapped optical desiccant after calibration using cal gas to dry head space. New RH 7%. |
| CR10X 3501 | 2019-09-27 | Lab none | Upgrade | Lab none | I upgraded the OS from v4 to v23. All seems well. The internal lithium battery is dead and needs to be replaced before deployment. |
| GP-001 GP20160096 | 2019-09-20 | Lab none | Tested | Lab none | Tested in the lab, and seems to be responding fine against another 1% probe. Not sure what the issue was in the field. However, the connection between the sensor and the screw connector is loose, so it should be sealed before re-deployment. |
| GP-001 GP20150109 | 2019-09-20 | Lab none | Tested | Lab none | Tested in the lab and still maxing out. This sensor should be sent back to the factory/disposed. |
| GP-001 GP20150109 | 2019-09-18 | East Pond CO2 Probe | Removed | Lab none | Removed from EP and brought back to the lab for testing b/c it was maxing out. |
| GP-001 GP20160096 | 2019-09-18 | East End CO2 probe | Removed | Lab none | Removed from East Pond because it was railed high even in air. |
| GP-001 GP20140026 | 2019-09-18 | Lab none | Installed | West Pond CO2 Probe B | Reinstalled at the northwest corner of the scaffolding. The water level is low so it is sitting in a puddle for the time being. |
| Mark I A001911 | 2019-09-18 | Lab none | Installed | Sherman Wetland Weather Station | Reinstalled at new location on radiation boom pointing south. Plugged into tower power. |
| GP-001 GP20140026 | 2019-09-16 | Lab none | Tested | Lab none | Tested against 2 good sensors (1% and 2%) in the lab test chamber with atmospheric CO2 and with an exhalation. Seemed to respond similarly to the other sensors. This sensor has degraded threads, so you can't get the cable off. I will seal up the connection again. I'm not sure why it was maxing out in the field, but seems fine now. Maybe some condensation inside evaporated? |
| LI-7550 AIU-1866 | 2019-09-04 | Bouldin Alfalfa-ReleaseEx Interface LI-7550 | Removed | Lab none | Removed from Bouldin Alfalfa with the end of the CH4 release experiment. This unit was on the secondary tower |
| LI-7500A 0073 | 2019-09-04 | Bouldin Alfalfa Gas Analyzer CO2/H2O | Removed | Lab none | Removed from Bouldin Alfalfa with the end of the CH4 release experiment. This unit was at the top of the secondary tower |
| LI-7700 TG1-0396 | 2019-09-04 | Bouldin Alfalfa-ReleaseEx Gas Analyzer CH4 | Removed | Lab none | Removed from Bouldin Alfalfa with the end of the CH4 release experiment. This unit was at the top of the secondary tower |
| WM 1590 153805 | 2019-09-04 | Bouldin Alfalfa-ReleaseEx Anemometer Upper | Removed | Lab none | Removed from Bouldin Alfalfa with the end of the CH4 release experiment. This unit was at the top of the secondary tower |
| WM 1590 120907 | 2019-09-04 | Bouldin Alfalfa-ReleaseEx Anemometer Reflected | Removed | Lab none | Removed from Bouldin Alfalfa with the end of the CH4 release experiment. This unit was in the lowest inverted position on the secondary tower. |
| PS-15M 12501584 | 2019-09-04 | Bouldin Alfalfa-ReleaseEx Solar Controller Far | Removed | Lab none | Removed from Bouldin Alfalfa with the end of the CH4 release experiment. This unit was at the far release point. |
| CR10X 47253 | 2019-09-04 | Bouldin Alfalfa-ReleaseEx Data Logger Far | Removed | Lab none | Removed from Bouldin Alfalfa with the end of the CH4 release experiment. This unit was at the far release point. |
| GP-001 GP20160096 | 2019-09-04 | Lab none | Installed | East End CO2 probe | The CO2 probe attached to the plastic chain to hang next to the miniDot. |
| LI-7700 TG1-0211 | 2019-09-04 | East Pond Gas Analyzer CH4 | Upgrade | East Pond Gas Analyzer CH4 | We updated the 7700 firmware from v1.0.23 to v1.0.27. First try failed part way through, second try was successful. |
| GL-136 GL-136-01 | 2019-09-04 | Lab none | Installed | Mayberry 0 | This new sensor is in the water next to the northeast corner post of the scaffolding. It was in about 21cm of water and about 5 cm above the bottom. Test to see if a cheap sensor can do as well as the expensive ones. |
| Mark I A001911 | 2019-09-04 | Sherman Wetland Weather Station | Removed | Lab none | Removed because solar panel power cable had fallen off and was damaged. |
| LI-7700 TG1-0357 | 2019-09-04 | Sherman Barn Gas Analyzer CH4 | Upgrade | Sherman Barn Gas Analyzer CH4 | We updated the 7700 firmware from v1.0.21 to v1.0.27. To do this we had to change the 7700’s IP address to 192.168.2.77 – it was still at the default 169 subnet |
| PS-15M 12501588 | 2019-08-19 | Bouldin Alfalfa-ReleaseEx Solar Controller Near | Removed | Lab none | Removed from the closer (day time) CH4 release point. The secondary tower and farther release point will continue. |
| CR10X 27930 | 2019-08-19 | Bouldin Alfalfa-ReleaseEx Data Logger Near | Removed | Lab none | Removed from the closer (day time) CH4 release point. The secondary tower and farther release point will continue. |
| HMP60 L1740398 | 2019-08-16 | Lab none | Installed | Bouldin Alfalfa-ReleaseEx RH & Temp Lower | Installed for CH4 release experiment at 0.4m and will continue to measure in hopes of giving insight on boundary layer. |
| HMP60 G4540023 | 2019-08-16 | Lab none | Installed | Bouldin Alfalfa-ReleaseEx RH & Temp Upper | Installed for CH4 release experiment at 5.68m and will continue to measure in hopes of giving insight on boundary layer. |
| WM 1590 120907 | 2019-08-16 | Lab none | Installed | Bouldin Alfalfa-ReleaseEx Anemometer Reflected | Installed for CH4 release experiment. This unit was mounted in an inverted position to measure wind at near max canopy height. |
| WM 1590 153805 | 2019-08-16 | Lab none | Installed | Bouldin Alfalfa-ReleaseEx Anemometer Upper | Installed for CH4 release experiment. This unit was part of a secondary, lower eddy system |
| LI-7550 AIU-1866 | 2019-08-16 | Lab none | Installed | Bouldin Alfalfa-ReleaseEx Interface LI-7550 | Installed for CH4 release experiment. This unit was part of a secondary, lower eddy system |
| LI-7700 TG1-0396 | 2019-08-16 | Lab none | Installed | Bouldin Alfalfa-ReleaseEx Gas Analyzer CH4 | Installed for CH4 release experiment. This unit was part of a secondary, lower eddy system |
| LI-7500A 0073 | 2019-08-16 | Lab none | Installed | Bouldin Alfalfa Gas Analyzer CO2/H2O | Installed for CH4 release experiment. This unit was part of a secondary, lower eddy system |
| PS-15M 12501584 | 2019-08-16 | Lab none | Installed | Bouldin Alfalfa-ReleaseEx Solar Controller Far | Installed for CH4 release experiment. This unit was part of the farther (nigth time) release point. |
| CR10X 47253 | 2019-08-16 | Lab none | Installed | Bouldin Alfalfa-ReleaseEx Data Logger Far | Installed for CH4 release experiment. This unit was part of the farther (nigth time) release point. |
| PS-15M 12501588 | 2019-08-16 | Lab none | Installed | Bouldin Alfalfa-ReleaseEx Solar Controller Near | Installed for CH4 release experiment. This unit was part of the closer (day time) release point. |