Equipment and Calibration History
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [35] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70| Ser No. | Date | Loc From | Title | Loc To | Notes |
|---|---|---|---|---|---|
| LI-7500A 75H-2514 | 2018-09-27 | Lab none | Installed | Tonzi-Floor | Installed on the Tonzi Tower to replace sn 0035 for calibration. |
| LI-7500A 0035 | 2018-09-27 | Tonzi-Floor Gas Analyzer CO2/H2O | Removed | Lab Gas Analyzer CO2/H2O | Removed from Tonzi Tower for calibration. replaced by sn 75H-2514 |
| LI-7500A 0073 | 2018-09-27 | Lab none | Installed | Tonzi-Tower Gas Analyzer CO2/H2O | Installed on the Tonzi Tower to replace sn 75H-2180 for calibration. |
| LI-7500A 75H-2180 | 2018-09-27 | Tonzi-Tower Gas Analyzer CO2/H2O | Removed | Lab none | Removed from Tonzi Tower for calibration. replaced by sn 0073 |
| LI-7500A 0065 | 2018-09-27 | Lab none | Installed | Vaira Gas Analyzer CO2/H2O | Installed on the Vaira Tower to replace sn 1594 for calibration. |
| LI-7500A 1594 | 2018-09-27 | Vaira Gas Analyzer CO2/H2O | Removed | Lab none | Removed from the Vaira Tower for calibration. Replaced by sn 0065. |
| LI-7500A 0065 | 2018-09-26 | Lab none | Calibration | Lab none | Last calibration: 2018-04-04 AGC=99.7 SDM=0 DAC1=0 DAC2=0 Ambient P=100.4kPa, Tair=26.6C, Tdew=13.8C Zero Air at 1600psi, AMP Air 408.97 at 1200 Tdewspan=16.00 CO2 zero 0.8905 -> .8903 Offset: -1.09ppm CO2 span 1.0231 -> 1.0184 Offset: 2.48ppm H2O zero 0.7082 -> .7086 Offset: 2.7ppm H2O span 1.0185 -> 1.0155 Offset: .07ppm Notes: |
| LI-7500A 0073 | 2018-09-26 | Lab none | Calibration | Lab none | Last calibration: 2018-04-13 AGC=99.7 SDM=0 DAC1=0 DAC2=0 Ambient P=100.5kPa, Tair=25.8C, Tdew=13.3C Zero Air at 1600psi, AMP Air 408.97 at 1200 Tdewspan=16.00 CO2 zero 0.9575 -> .9569 Offset: -2.02ppm CO2 span 1.0145 -> 1.0112 Offset: 1.56ppm H2O zero 0.7295 -> .7314 Offset: 2.0ppm H2O span 1.0131 -> 1.0183 Offset: -.12ppm Notes: |
| LI-7500A 75H-2514 | 2018-09-26 | Lab none | Calibration | Lab none | Last calibration: 2018-04-18 AGC=100.1 SDM=0 DAC1=0 DAC2=0 Ambient P=100.3kPa, Tair=27.3C, Tdew=12.7C Zero Air at 1600psi, AMP Air 408.97 at 1200 Tdewspan=16.00 CO2 zero 0.906 -> .9045 Offset: -6.04ppm CO2 span 1.0106 -> 1.0036 Offset: 3.52ppm H2O zero 0.8368 -> .8370 Offset: 1.3ppm H2O span 1.016 -> 1.0165 Offset: -.01ppm Notes: |
| LI-7500A 75H-2668 | 2018-09-26 | Lab none | Calibration | Lab none | Last calibration: 2018-04-04 AGC=100.0 SDM=0 DAC1=0 DAC2=0 Ambient P=100.4kPa, Tair=26.5C, Tdew=13.8C Zero Air at 1600psi, AMP Air 408.97 at 1200 Tdewspan=16.00 CO2 zero 0.9393 -> 0.9392 Offset: -.27ppm CO2 span 1.0147 -> 1.0153 Offset: -.27ppm H2O zero 0.9038 -> .9056 Offset: 10.6ppm H2O span 1.0146 -> 1.0166 Offset: .05ppm Notes: "Check PLL" error for the first 30 seconds, then status changed to "OK." |
| LAI-2000 PCA-0846 | 2018-09-19 | Lab none | Loaned | Loaned | Loaned to Sebastian Wolf sewolf@ethz.ch for a few weeks for his work a Sagehen. |
| LAI-2000 PCA-1478 | 2018-09-20 | Lab none | Damaged | Lab none | The push button on the wand is failing. |
| GP-001 GP20150109 | 2018-09-18 | Lab none | Installed | East Pond CO2 Probe | Installed at East Pond hanging just below the water surface below the data logger box. |
| CR10X 47253 | 2018-05-23 | Tonzi | Removed | Lab none | Removed from the Tonzi Tower with the old CO2 profile system. New Vaisala profile system is running |
| LI-820 CGA-556 | 2018-05-23 | Tonzi | Removed | Lab none | Removed from the Tonzi Tower with the old CO2 profile system. New Vaisala profile system is running |
| LED-NDVI LED-05 | 2018-05-23 | Tonzi | Removed | Lab none | Removed from the Tonzi Tower because it has not been working for a while and there are Decagon SRS sensors from NDVI and PRI |
| PQS 1 161073 | 2017-08-15 | Factory | Calibration | Factory | y = 209.39*x; Calibrated by Ameriflux at OSU. 4.78 uV/(umol/m2/s). 1000/4.78 = 209.39 (umol/m2/s)/mV |
| AM16-32A 1238 | 2018-07-12 | Loaned | Disposed | Disposed | Given to Tibisay Perez in Whendee Silver's lab in exchange for a new AM16/32B sn 27703 |
| LI-190SA Q29881 | 2007-01-19 | Tonzi PAR Sensor Incoming | Removed | Lab none | Removed from Tonzi Tower top. |
| LI-190SA Q29892 | 2007-01-19 | Tonzi | Removed | Lab none | Removed from Tonzi Tower top. |
| LI-190SA Q29892 | 2001-07-10 | Factory | Calibration | Factory | y = 248.59*x; Initial factory calibration 6.66 uA/(umol/m2/s). Using a 604Ohm millivolt adapter 1000/(6.66*0.604) = 248.59 (umol/m2/s)/mv |
| LI-190SA Q29892 | 2001-09-07 | Lab none | Installed | Tonzi | Installed on the Tower top in the outgoing position |
| LI-190SA Q29881 | 2001-09-07 | Lab none | Installed | Tonzi PAR Sensor Incoming | Installed on the Tower top in the incoming position |
| LI-190SA Q29881 | 2001-07-10 | Factory | Calibration | Factory | y = 248.97*x; Initial factory calibration 6.65 uA/(umol/m2/s). Using a 604Ohm millivolt adapter 1000/(6.65*0.604) = 248.97 (umol/m2/s)/mv |
| CNR1 990181 | 2001-05-20 | Lab none | Installed | Vaira Net Radiometer 4-way | Installed on the Vaira tower |
| NR-LITE 990351 | 2001-05-20 | Lab none | Installed | Tonzi | Installed on the Tower top with the initial set up of the site |
| PAR-LITE 990017 | 2001-05-20 | Lab none | Installed | Tonzi | Installed on the Tower top in the reflected PAR location with the initial set up of the site |
| PAR-LITE 990019 | 2001-05-20 | Lab none | Installed | Tonzi | Installed on the Tower Top in the incoming PAR position. |
| PAR-LITE 990021 | 2001-05-20 | Lab none | Installed | Tonzi | Installed on the Tower top as a calibration sensor |
| eosFD 20160002 | 2012-10-17 | Lab none | Troubleshooting | Lab none | This chamber was installed at the Tonzi soil co2 profile at the Open location but did not start up. I brought it back in to test. Eosense mentioned a “heat-start-up issue†but thought it had been fixed. It tested fine in the lab. |
| HMP45AC T2130005 | 2018-08-23 | Lab none | Installed | Sherman Wetland RH & Temp | Installed at SW to replace the other HMP45 with a too short cable. Mounted in the original location. 1% slope in T and 6% slope in RH from TA inter-comparison. |
| HMP45AC W0730036 | 2018-08-23 | Sherman Wetland RH & Temp | Removed | Lab none | Removed from SW because its cable was to short to allow it to be mounted in the correct place. |
| HMP45AC T1250012 | 2018-08-23 | Lab none | Installed | Bouldin Alfalfa RH & Temp | Installed on BA to replace an HMP60 with low temperature readings. This sensor was in the TA inter-comparison T slope was 1.0462 and RH slope was 1.0369. |
| HMP60 L1740398 | 2018-08-23 | Bouldin Alfalfa RH & Temp | Removed | Lab none | Removed from BA due to low temperature readings. Several other HMP60s have similarly failed. |
| eosFD FD20160001 | 2018-08-07 | Lab none | Installed | Bouldin Alfalfa Forced Diffusion A | Installed under the BA scaffolding over bare soil. |
| HMP45AC W0730036 | 2018-08-07 | Lab none | Installed | Sherman Wetland RH & Temp | Installed at SW to replace HMP60 sn L2310736. The HMP60 was reading numbers lower than reasonable. |
| HMP60 L2310736 | 2018-08-07 | Sherman Wetland RH & Temp | Removed | Lab none | Removed from SW because it has been reading too low. It was replaced with HMP45 sn W0730036. |
| Raven XT 1131631861 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| NR01 1514 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -8cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| HFP01SC 2500 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at about 1m agl at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| HFP01SC 2495 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -8cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX350J T21009229B37030 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| RF401 35785 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15731 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -60cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15729 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -20cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15802 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -10cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15852 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -5cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15730 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -40cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15764 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -80cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TE 5TE-1400 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -80cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TE 5TE-1274 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -60cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TE 5TE-1275 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -40cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TE 5TE-1393 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -20cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TE 5TE-1281 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -5cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TE 5TE-1287 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -10cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TE 5TE-1278 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -2cm at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| TE525 48130-611 | 2012-01-09 | Lab none | Installed | Tonzi | Installed on the ground at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| AM16/32B 10194 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| CR3000 38970 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| CE4 1329 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP1 inside the soil co2 fence. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| OS136-1-MVC NO1107536 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at SP2 near the Tower. The sensor is pointing at the ground to the south at about a 45deg angle from vertical. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX350J T21009229B43579 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| RF401 35787 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15836 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -70cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15818 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -20cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15846 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -5cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15822 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -10cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15840 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -30cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15856 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -50cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1405 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -70cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1308 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -50cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1407 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -30cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1396 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -20cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1282 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -10cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1285 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -5cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1306 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -2cm at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| TE525 48132-611 | 2012-01-09 | Lab none | Installed | Tonzi | Installed on the ground at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| AM16/32B 10195 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| CR1000 41909 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| CE4 1328 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP2 near the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| OS136-1-MVC NO1107535 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at SP3 southeast of the Tower. The sensor is pointing at the ground to the south at about a 45deg angle from vertical. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX350J T21009229B43638 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| RF401 35754 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15839 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -45cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15833 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -20cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15825 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -30cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15824 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -5cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15942 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -65cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| SX229 15843 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -10cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1296 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -65cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1395 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -30cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1297 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -45cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1388 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -20cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1315 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -10cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1286 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -5cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| STD-5TM 5TM-1342 | 2012-01-09 | Lab none | Installed | Tonzi | Installed at -2cm at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| TE525 48102-611 | 2012-01-09 | Lab none | Installed | Tonzi | Installed on the ground at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| AM16/32B 10208 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| CR1000 41907 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |
| CE4 1327 | 2012-01-09 | Lab none | Installed | Tonzi | Installed in the Campbell Enclosure at SP3 southeast of the Tower. This is the initial setup of the site by Richard Cuenca and Yutaka Hagimoto of Oregon State Univ. |