| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|
| 3611 |
2018-07-17 |
Lab none |
Installed |
East End DO Sensor |
Turned on and reinstalled with fresh batteries. The water level is very low so the sensor end is just sitting on the muck. |
| 3603 |
2018-07-12 |
East End DO Sensor |
Removed |
Lab none |
Brought back to the lab to replace batteries. |
| 3250 |
2017-11-10 |
Lab none |
Installed |
East End DO Sensor |
Installed at East End hanging from the north side of the scaffolding |
| 3136 |
2017-09-26 |
East End-Temp2 DO Sensor |
Removed |
Lab none |
Removed from East End Temporary Tower 2 - Close Canopy with the decommissioning of the tower. |
| 3249 |
2017-09-13 |
East End DO Sensor |
Moved |
East End-Temp2 DO Sensor |
Moved from the Permanent Tower to the T2 Closed Canopy Temporary Tower |
| 3247 |
2017-08-02 |
East End-Temp3 DO Sensor |
Moved |
East End DO Sensor |
The miniDOT was moved with the Hobo conductivity sensor from the T3 Boardwalk Temporary Tower to the Permanent Tower. |
| 3246 |
2017-06-23 |
Lab none |
Installed |
East End-Temp3 DO Sensor |
Installed at the East End T3 Boardwalk Temporary Tower with the Hobo conductivity sensor. |
| 2845 |
2017-06-23 |
Mayberry DO Sensor D |
Moved |
East End-Temp3 DO Sensor |
Removed MiniDOT (from upper position; it was 1 of 2 sensors in upper position) since water level has been really low and we probably decided 2 sensors was probably enough for a profile. Installed it at EE Temp Tower 3. |
| 3960 |
2017-05-25 |
Mayberry DO Sensor D |
Moved |
Mayberry DO Sensor D |
Moved from static boom (upper position, -10 cm based on water level on 2017-05-10) to floating boom with sn 1221 (upper position, -17 cm). |
| 3954 |
2017-05-10 |
Mayberry DO Sensor F |
Moved |
Mayberry DO Sensor D |
sn 1219 moved from lower position (-68 cm based on water level on 2017-02-23) to upper position (-10cm based on water level on 2017-05-10). All 3 miniDOT sensors (sn 1219, sn 1220, sn 1221) are at this depth for now. |
| 2635 |
2017-02-23 |
Mayberry DO Sensor D |
Moved |
Mayberry DO Sensor F |
Moved from the upper position on the fence post in the channel to the bottom position (-68 cm based on water level at 2017-02-23) on the new water sensor boom. |
| 3966 |
2016-10-11 |
Mayberry DO Sensor E |
Moved |
Mayberry DO Sensor D |
Moved from middle position to upper position (top sensor could not be removed so it was moved to lower position; bottom/lower sensor was removed). |
| 3958 |
2015-04-23 |
Mayberry DO Sensor E |
Moved |
Mayberry DO Sensor E |
Sensor was moved up 10 cm on fence post: from -65 cm (based on water level 2014-10-09) to -50 cm (based on water level on 2015-04-23). |
| 1603 |
2014-10-16 |
Lab none |
Installed |
Mayberry DO Sensor E |
Installed at 66cm below the water surface on the fence post in the channel. |
| 1600 |
2014-10-09 |
West Pond DO Sensor B |
Removed |
Lab none |
Removed from West Pond for installation at Mayberry where a longer profile is possible. |
| 1587 |
2014-09-25 |
Lab none |
Installed |
West Pond DO Sensor B |
Installed at West Pond in a profile at 7.5cm above soil in water column. |
| 1568 |
2014-09-24 |
Lab none |
Maintenance |
Lab none |
Using the miniDOTControl program I set the time and set the sample interval to one minute. |
