Equipment and Calibration History

History for Campbell Sci. NL115 6761

Rec No.	Date	Loc From	Title	Loc To	Notes
5918	2022-07-14	Bouldin Corn Interface NL115	Removed	Lab none	Removed from BC and brought back to the lab for testing. The bottom 1/2-1/3 of phenocam photos is gray. Could be an interface or a card problem. It was replaced by sn 13056.
5904	2022-06-09	Lab none	Installed	Bouldin Corn Interface NL115	Installed on met CR1000 at BC and connected to Stardot phenocam
3117	2017-10-04	East End-Temp3 Interface NL115	Removed	Lab none	Removed with the decommissioning of Temporary Tower #3 - Boardwalk site.
2875	2017-06-23	Lab none	Installed	East End-Temp3 Interface NL115	Installed at the East End Temporary Tower #3 Boardwalk location with the initial setup of the site.
2785	2017-05-24	Tonzi-Floor	Removed	Lab none	Removed from the Tonzi Floor tower. Replaced by the new Licor GHG system from Ameriflux.
1088	2013-10-18	Lab none	Installed	Tonzi-Floor	Installed on the Tonzi Floor tower to replace sn 9774 that was having problems with its eject button.
1016	2013-05-15	Vaira	Removed	Lab none	This NL115 was removed from Vaira along with CR1000 sn 47108 where they were used to collect images from the Starsot Phenocam. They were replaced by a Raspberry Pi
912	2013-01-24	Lab none	Installed	Vaira	Installed the the computer box with CR1000 sn 47108 to collect images from the Phenecam
845	2012-11-08	West Pond Interface NL115 ATI	Removed	Lab none	Removed from West Pond with the ATI sonic after a three week inter-comparison
846	2012-10-18	Sherman Island Interface NL115 ATI	Installed	West Pond Interface NL115 ATI	Installed at West Pond with the ATI sonic for a three week inter-comparison
646	2012-02-15	Lab none	Installed	Sherman Island	Installed on the CR1000 at Sherman to connect the LI7700. This replaced CFM100 sn 4994.