| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|
| 6291 |
2023-05-03 |
Bouldin Corn Heat Flux Plate A |
Installed |
Bouldin Corn Heat Flux Plate A |
Installed in soil under tower at 2cm depth. |
| 6285 |
2023-04-26 |
Bouldin Corn Heat Flux Plate A |
Moved |
Bouldin Corn Heat Flux Plate A |
Moved from field to tower in preparation for impending plowing. Not installed in soil yet. |
| 4793 |
2020-09-01 |
Bouldin Corn Heat Flux Plate A |
Moved |
Bouldin Corn Heat Flux Plate A |
Moved tower and soil sensors back from field in preparation for corn harvest. Soil sensors were reinstalled under the tower at -2cm depth. |
| 4785 |
2020-05-19 |
Bouldin Corn Heat Flux Plate A |
Moved |
Bouldin Corn Heat Flux Plate A |
Moved back into the field from being under the scaffolding at the side of the field for tilling and planting. |
| 4291 |
2019-12-13 |
Lab none |
Installed |
Bouldin Corn Heat Flux Plate A |
Re-installed at Bouldin Corn after re-assembling tower. Need to check if this in A/B/C location. |
| 4258 |
2019-12-02 |
Bouldin Corn Heat Flux Plate A |
Removed |
Lab none |
Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26. |
| 2722 |
2017-04-26 |
Lab none |
Installed |
Bouldin Corn Heat Flux Plate A |
Installed at the Bouldin Corn site with the initial set up of the tower. Temporarily at the south edge of the scaffolding until tractor work is finished. |
| 1956 |
2015-06-11 |
Factory |
Calibration |
Factory |
Initial factory calibration: 62.52 uV/(W/m2) |
