Equipment and Calibration History

History for Hukseflux HFP01 10809

Rec No.	Date	Loc From	Title	Loc To	Notes
5190	2021-03-11	Lab none	Installed	Hill Slough Heat Flux Plate B	Installed at Hill Slough with site setup.
4959	2020-11-12	Sherman Wetland-Temp1 Heat Flux Plate B	Removed	Lab none	Removed with decommissioning of Sherman Wetland Temp tower. Brought back to the lab for cleanup.
4492	2020-05-21	Sherman Wetland-Temp1 Heat Flux Plate B	Moved	Sherman Wetland-Temp1 Heat Flux Plate B	Moved from 5cm depth and 30 degree angle to 2cm depth below soil surface and horizontal.
4342	2020-01-30	East Pond Heat Flux Plate C	Moved	Sherman Wetland-Temp1 Heat Flux Plate B	Removed with the decommissioning of the EP tower and installed at the new SW Temporary site 1250m upwind of the Permanent Tower.
3427	2018-04-17	Lab none	Installed	East Pond Heat Flux Plate C	Installed at EP tower as part of initial site set up in profile C (South) and mux channel 10
3339	2018-02-27	Lab none	Repair	Lab none	Re-stripped cable so the correct ground wire was showing. The brown wire had been used as the ground, but that is not connected to anything. I fixed the cable so the three exposed wires are white (sig +), green (sig -) and bare (ground).
3090	2017-09-26	East End-Temp2 Heat Flux Plate B	Removed	Lab none	Brought back to the lab with the decommissioning of the East End closed canopy temporary tower 2.
2866	2017-06-14	Lab none	Installed	East End-Temp2 Heat Flux Plate B	Installed on the East End Temporary Tower #2 Closed Canpoy location with the initial tower set up.
2687	2017-04-04	Twitchell Rice Heat Flux Plate A	Removed	Lab none	Removed with the decommissioning of the Twitchell Rice site.
1781	2015-04-09	Lab none	Installed	Twitchell Rice Heat Flux Plate A	Installed at rice as SHF1 in mux channel 16
1970	2014-10-17	Factory	Calibration	Factory	Initial factory calibration: a0 = 0 a1 = 62.69 uV/(W/m2)