Equipment and Calibration

Equipment Entry

Instrument:	Conductivity Sensor
Manufacture:	Onset
Model No:	U24-002-C
Serial No:	11020258
Tag No:
Acquisition Date:	2016-11-07
Project:	CDFW
Location on 2019-08-07:	Lab,
Notes:	HOBO conductivity logger 100-55,000uS/cm Low Range: 50 to 30,000 uS/cm High Range: 1,000 to 55,000 uS/cm

No documents found

Rec No.	Date	Loc From	Title	Loc To	Notes
4043	2019-08-07	East Pond Conductivity Sensor	Removed	Lab none	Removed from EP and brought back to the lab for testing. I haven't been able to connect to it through the HOBOware software for a while.
3435	2018-04-24	Lab none	Installed	East Pond Conductivity Sensor	Installed at East Pond as part of the initial setup.
3137	2017-09-26	East End-Temp2 Conductivity Sensor	Removed	Lab none	Removed from East End Temporary Tower 2 - Closed Canopy with the decommissioning of the tower.
3248	2017-09-13	East End Conductivity Sensor	Moved	East End-Temp2 Conductivity Sensor	Moved from the Permanent Tower to the T2 Closed Canopy Temporary Tower
3251	2017-08-02	East End-Temp3 Conductivity Sensor	Moved	East End Conductivity Sensor	The Hobo conductivity sensor was moved with the miniDOT from the T3 Boardwalk Temporary Tower to the Permanent Tower.
2884	2017-06-23	Lab none	Installed	East End-Temp3 Conductivity Sensor	Installed at the East End Temporary Tower #3 Boardwalk location with the initial setup of the site.
2853	2017-05-25	Mayberry Conductivity Sensor B	Removed	Lab none	Removed from Mayberry for use on the temporary tower at East End
2525	2016-11-16	Lab none	Installed	Mayberry Conductivity Sensor B	The HOBO conductivity sensor was put in the water near the existing conductivity sensor at the southeast corner of the scaffolding for an intercomparison with the Campbell CS547A sensor b/c we're technically out of the CS547A range. It is tied to the tower with some rope.