Equipment and Calibration History

History for Campbell Sci. CR10X 47253

Rec No.DateLoc FromTitleLoc ToNotes
5255 2021-04-27 Lab none Installed Hill Slough Data Logger Diffuse Installed at HS as part of the rotating shadow band diffuse PAR setup
4098 2019-09-04 Bouldin Alfalfa-ReleaseEx Data Logger Far Removed Lab none Removed from Bouldin Alfalfa with the end of the CH4 release experiment. This unit was at the far release point.
4082 2019-08-16 Lab none Installed Bouldin Alfalfa-ReleaseEx Data Logger Far Installed for CH4 release experiment. This unit was part of the farther (nigth time) release point.
3700 2018-05-23 Tonzi Removed Lab none Removed from the Tonzi Tower with the old CO2 profile system. New Vaisala profile system is running
3375 2018-03-06 Lab none Installed Tonzi Installed at Tonzi to try to fix the CR10x running the tower's old CO2 profile system. It replaced sn 20138.
1848 2015-05-12 Sherman Island Data Logger Met Removed Lab none Removed with the decommissioning of the Sherman Cow Pasture site.
1606 2011-07-21 Lab none Installed Sherman Island Data Logger Met The silver box of this data logger was reinstalled in the met wiring panel at the Sherman Pasture. The silver box sn 20139 was removed.
376 2011-06-13 Lab none Upgrade Lab none I upgraded the firmware on this data logger from OS Rev 22 to OS Rev 23.
368 2011-05-27 Sherman Island Data Logger Met Removed Lab none The silver data logger module was removed from the tower. The wiring panel remained in place with a new data logger module.
35 2010-02-05 Sherman Island Data Logger Met Location Sherman Island Data Logger Met Currently used to collect met data at Sherman Island.
Wiring panel 36418