Equipment and Calibration History

History for Kipp & Zonen PAR-LITE 050597

Rec No.DateLoc FromTitleLoc ToNotes
5184 2021-03-11 Lab none Installed Hill Slough PAR Sensor Incoming Installed at Hill Slough with site setup in incoming position
5132 2021-02-26 Sherman Wetland-Temp1 PAR Sensor Incoming Removed Lab none Removed from the decommissioned temporary location and brought back to the lab to be cleaned up.
4964 2020-11-12 Sherman Wetland-Temp1 PAR Sensor Incoming Notes Sherman Wetland-Temp1 PAR Sensor Incoming Tried to remove from boom with decommissioning of Sherman Wetland Temp tower, but it was stuck. Need vice grips and/or drill.
4349 2020-01-30 East Pond PAR Sensor Incoming Moved Sherman Wetland-Temp1 PAR Sensor Incoming Removed with the decommissioning of the EP tower and installed at the new SW Temporary site 1250m upwind of the Permanent Tower.
3411 2018-04-17 Lab none Installed East Pond PAR Sensor Incoming Installed at EP tower as part of initial site set up. This sensor is in the upward facing position collecting incoming PAR
3089 2017-09-26 East End-Temp2 PAR Sensor Reflected Removed Lab none Brought back to the lab with the decommissioning of the East End closed canopy temporary tower 2
2870 2017-06-14 Lab none Installed East End-Temp2 PAR Sensor Reflected Installed on the East End Temporary Tower #2 Closed Canpoy location with the initial tower set up.
2705 2017-04-04 Twitchell Rice PAR Sensor Incoming Removed Lab none Removed with Twitchell Rice tower decommissioning.
1738 2009-04-03 Lab none Installed Twitchell Rice PAR Sensor Incoming Installed with the initial set up of the Twitchell Rice tower. This sensor is pointing up.
5415 2005-07-11 Factory none Calibration Factory none Initial factory calibration 5.35 uV/(uE/m2/s)