Equipment and Calibration History

History for Kipp & Zonen NR-LITE 990350

Rec No.DateLoc FromTitleLoc ToNotes
6089 2022-11-02 Bouldin Alfalfa-ADEX Net Radiometer Edge Removed Lab none Removed from top of the Edge tower at 3.34m alg at the end of the 2022 advection experiment at BA
5851 2022-04-25 Lab none Installed Bouldin Alfalfa-ADEX Net Radiometer Edge Installed on top of the Edge tower at 334m alg for the advection experiment at BA
5757 2022-03-31 Hill Slough Net Radiometer Removed Lab none Removed from HS because we are done comparing the NR01 data to it. Planning to use this sensor for the advection setup this summer.
5183 2021-03-11 Lab none Installed Hill Slough Net Radiometer Installed at Hill Slough with site setup. Temporary Rnet measurement until we have finished testing the 4-way radiometer.
4192 2019-10-01 Lab none Calibration Lab none New calibration factor of 13.0 uV/(W/m2).

Tested this sensor at Oxford Tract against AMP 4-band radiometer CNR4 sn 16084. See RT Report "Oxford Tract Radiometer Comparison - 09/2018" for details. https://nature.berkeley.edu/biometlab/bmetdata/rtreport.php?screen=view&id=27
4022 2019-07-25 Mayberry Net Radiometer Water Removed Lab none Removed from MB (Rnet_water) and brought back to the lab for repair (broken cable). It was replaced by sn 990351.
326 2011-03-01 Lab none Installed Mayberry Net Radiometer Water In stalled on the Mayberry tule tower over the water.
289 2011-02-03 Tonzi Removed Lab none Removed from under the trees near the floor tower.
101 2010-03-16 Lab none Installed Tonzi Installed at the request of Hideki under the oak canopy near the radiation tram at Tonzi.
3807 2002-02-08 Lab none Installed Tonzi Gas Analyzer CO2/H2O Installed inside the orange fence on the floor met CR10x data logger.
4193 1999-07-29 Factory Calibration Factory Initial Factory calibration 13.5uV/W/m2