| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|
| 6870 |
2024-09-26 |
Hill Slough DO Sensor |
Adjusted |
Hill Slough DO Sensor |
Set clock in the field +1628 seconds (+27.1 minutes) to match internet time (used my cell phone hotspot to connect the laptop to the internet) |
| 6016 |
2022-10-05 |
Lab none |
Installed |
Hill Slough DO Sensor |
Installed after cleaning and measurement check in the lab. |
| 6006 |
2022-09-29 |
Hill Slough DO Sensor |
Removed |
Lab none |
Removed from the HS channel and brought back to the lab for cleaning. There are calcareous deposits (some sort of encrusting worm) on and around the sensing foil. I soaked it in distilled white vinegar for 3 days. The deposits came off easily with a soft toothbrush. I rinsed the sensor well under DI water. |
| 5603 |
2021-12-02 |
Lab none |
Installed |
Hill Slough DO Sensor |
I reinstalled the MiniDot that we removed yesterday due to dead batteries. |
| 5618 |
2021-12-01 |
Hill Slough DO Sensor |
Removed |
Lab none |
Removed from HS and brought back to the lab to swap its batteries. |
| 5557 |
2021-11-04 |
Lab none |
Installed |
Hill Slough DO Sensor |
Installed on a yellow chain near the SW corner of the platform. I think the sensor window is about 10cm above the ground |
| 5156 |
2021-02-26 |
Mayberry |
Removed |
Lab none |
Removed from MB wetland, where it was buried in the mud, and brought back to the lab to download its data |
| 5155 |
2020-05-29 |
Lab none |
Installed |
Mayberry none |
Buried in the mud at 30 cm at the 0.5 footprint site at Mayberry |
| 4340 |
2020-01-30 |
East Pond DO Sensor |
Removed |
Lab Heat Flux Plate B |
Removed with the decommissioning of the EP tower and bought back to the lab. |
| 3406 |
2018-04-17 |
Lab none |
Installed |
East Pond DO Sensor |
Installed at EP tower as part of initial site set up. Hung off of the west end of the tower. |
