Equipment and Calibration History

History for Hukseflux HFP01 10861

Rec No.	Date	Loc From	Title	Loc To	Notes
6289	2023-05-03	Bouldin Corn Heat Flux Plate C	Installed	Bouldin Corn Heat Flux Plate C	Installed in soil under tower at 2cm depth.
6283	2023-04-26	Bouldin Corn Heat Flux Plate C	Moved	Bouldin Corn Heat Flux Plate C	Moved from field to tower in preparation for impending plowing. Not installed in soil yet.
4795	2020-09-01	Bouldin Corn Heat Flux Plate C	Moved	Bouldin Corn Heat Flux Plate C	Moved tower and soil sensors back from field in preparation for corn harvest. Soil sensors were reinstalled under the tower at -2cm depth.
4787	2020-05-19	Bouldin Corn Heat Flux Plate C	Moved	Bouldin Corn Heat Flux Plate C	Moved back into the field from being under the scaffolding at the side of the field for tilling and planting.
4293	2019-12-13	Lab none	Installed	Bouldin Corn Heat Flux Plate C	Re-installed at Bouldin Corn after re-assembling tower. Need to check if this in A/B/C location.
4260	2019-12-02	Bouldin Corn Heat Flux Plate C	Removed	Lab none	Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26.
2723	2017-04-26	Lab none	Installed	Bouldin Corn Heat Flux Plate C	Installed at the Bouldin Corn site with the initial set up of the tower. Temporarily at the south edge of the scaffolding until tractor work is finished.
1952	2014-10-29	Factory	Calibration	Factory	Initial factory calibration: 62.59 uV/(W/m2)