Equipment and Calibration History

History for Hukseflux HFP01 000141

Rec No.	Date	Loc From	Title	Loc To	Notes
6799	2024-05-15	Tonzi Heat Flux Plate F	Maintenance	Tonzi Heat Flux Plate F	Rewired to new junction box and updated data logger program.
966	2013-04-24	Lab none	Installed	Tonzi-SoilCO2	Installed as SHF#1 on the soil CO2 CR23X and placed in the ground to the south of the data logger box
776	2012-09-06	Mayberry Heat Flux Plate Vegetation	Removed	Lab none	Reomved from the Tule Tower at Mayberry. SHF under a meter of water is questionable and these plates would be more useful else where. Removed to be calibrated and repurposed - not planning to replace.
330	2011-03-01	Lab none	Installed	Mayberry Heat Flux Plate Vegetation	Installed on the Mayberry tule tower measuring soil heat flux in the tules.
297	2011-02-03	Tonzi-Floor	Removed	Lab none	Removed from the open space neat the floor solar panels.
145	2010-06-24	Lab none	Installed	Tonzi-Floor	This sensor was installed near the open net radiation sensor in the floor site.
142	2010-06-15	Lab none	Repair	Lab none	Wire is exposed at the juction to the plate - covered with liquid electric tape. The wire is spliced in several locations - cut and resplice to new wire.
2336	2000-10-07	Lab none	Installed	Vaira Heat Flux Plate B	Installed with the initial set up of the Vaira site.
136	1999-09-09	Factory	Calibration	Factory	Initial factory calibration: 59.0 uV/W/m2