| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|
| 966 |
2013-04-24 |
Lab none |
Installed |
Tonzi-SoilCO2 |
Installed as SHF#1 on the soil CO2 CR23X and placed in the ground to the south of the data logger box |
| 776 |
2012-09-06 |
Mayberry Heat Flux Plate Vegetation |
Removed |
Lab none |
Reomved from the Tule Tower at Mayberry. SHF under a meter of water is questionable and these plates would be more useful else where. Removed to be calibrated and repurposed - not planning to replace. |
| 330 |
2011-03-01 |
Lab none |
Installed |
Mayberry Heat Flux Plate Vegetation |
Installed on the Mayberry tule tower measuring soil heat flux in the tules. |
| 297 |
2011-02-03 |
Tonzi-Floor |
Removed |
Lab none |
Removed from the open space neat the floor solar panels. |
| 145 |
2010-06-24 |
Lab none |
Installed |
Tonzi-Floor |
This sensor was installed near the open net radiation sensor in the floor site. |
| 142 |
2010-06-15 |
Lab none |
Repair |
Lab none |
Wire is exposed at the juction to the plate - covered with liquid electric tape. The wire is spliced in several locations - cut and resplice to new wire. |
| 2336 |
2000-10-07 |
Lab none |
Installed |
Vaira Heat Flux Plate B |
Installed with the initial set up of the Vaira site. |
| 136 |
1999-09-09 |
Factory |
Calibration |
Factory |
Initial factory calibration: 59.0 uV/W/m2 |
