Site: East End (US-Tw4)
No description found
Last field site visit:
| 2025-05-09 12:50:00 | Standard data collection, swapped 7500 for calibration, restarted shadow band motor - for now, set summer hours for 7700 heaters, conductivity sensor was clean, Picam misbehaving - maybe running for now. |
Equipment installed at the site:
Campbell Sci. Interface A547
Campbell Sci. Multiplexer AM16/32B
Campbell Sci. Multiplexer AM25T
Campbell Sci. Data Logger CR1000
Campbell Sci. Data Logger CR10X
Campbell Sci. Water Level CS451
Campbell Sci. Conductivity Sensor CS547A
Campbell Sci. RH & Temp HygroVUE10
Fabricated Battery Bank BB-Fab
Gill Anemometer WM 1590
Hukseflux Heat Flux Plate HFP01
Hukseflux Net Radiometer NR01
Kipp & Zonen PAR Sensor PAR-LITE
Kipp & Zonen PAR Sensor PQS 1
Licor Gas Analyzer LI-7500A
Licor Interface LI-7550
Licor Gas Analyzer LI-7700
PME DO Sensor miniDOT
Raspberry Pi Camera RPI0W
Texas Electronics Precipitation TR-525M
Vaisala Barometer PTB110
Data Streams:
| Code | Description |
|---|---|
| EE_met | |
| EE_flux | 30 minute averages of the 20Hz flux data |
| EE_cam | Digital number data from the autocam imagery |
| EE_t1flux | Eddy flux from temporary tower T1 at the open water site at East End. Originally on the levee at 38.109522, -121.636071, but moved about 60m south to the location below after the first month. |
| EE_t2met | Met data from Temporary tower 2 in and area with a largely closed canopy of cattails |
| EE_t2flux | 30min averages of the 20Hz flux data from the Temporary Tower in an area with a closed canopy of cattails |
| EE_t3met | Met data from East End Temporary Tower 3 on the first boardwalk to the south of the permanent tower. |
| EE_t3flux | 30min averages of the 10Hz flux data from the East End Temporary Tower #3 on the first boardwalk south of the permanent tower. |
| EE_minidot | Dissolved oxygen from the minidot sensor from different locations |
| BC_cam | Digital number data from Pheoncamera at Bouldin Alfalfa |
| EE_processed | Data loaded from the Level 1 processed data including fluxes and turbulence data |
| EE_processed3 | Gap filled and partitioned data from Level 3 processing files |