Field Notes
<--2004-07-08 10:30:00 |
2004-07-21 11:39:00-->
Other sites visited today:
Vaira |
Tonzi
Phenocam link:
Searching...Tonzi: 2004-07-21 11:00:00 (DOY 203)
Author: Siyan Ma
Others: Qi Chen, Ted
Summary: Leaf samples, new CO2 N2 tanks for Tower co2 profile,
When: July 21, 2004 (D203) arrived at 1100 PST Where: Tonzi/Vaira Ranch Who: Siyan Ma, Qi Chen, and Ted Hehn Weather: Sunny, hot (40 - 42oC), nice breeze on the top of tower Phenology: yellow grass, dead
Summary
- Overall EC systems were running well. Data were downloaded. In the floor PC, Gillsonic.exe was located at D:\Tonzi\. Be more careful when move Met data from D:\Tonzi\ to D:\Tonzi_2004\.
- Ted will re-set datalogger (23X) and two multiplexer in Vaira site today and tomorrow.
- Soil moisture was measured, but TDR reading screen may not perform well under direct sunlight? Or maybe TDR need recharged? Where is the charger?
- Leaf samples were taken from the trees with Tag 33, 31, 30, 222, and 29. Flags needed.
Tonzi_Tower Site
- Fence and gate were good. > 12 v
- Panel and Batteries were working well: Battery 13.3v; Solar 0.0 apms (probably because the batteries are fully charged.); Load 4.8 apms.
- Calibration tanks: Ted removed Praxair Cylinder # CC108631 (425.8 ppm) and installed Praxair Cylinder # SA3583 (428.7 ppm). A full N2 tank is put behind the garden box.
CO2 2200psig, flow ~10psi; N2 1100psig, flow ~10psi.
- Ted gave Siyan training on the manual calibration of CO2 profile system.
- Download data successfully.
- Reading from Gillsonic screen:
Time |
10:23:05 |
Path/File name |
TW4_203.flx |
|
mean |
std |
|
mean |
std |
w |
-0.77 |
1.013 |
Ts |
35.923 |
1.445 |
u |
4.16 |
1.86 |
H2O |
2.718 |
0.038 |
v |
-0.8 |
0.884 |
CO2 |
1.452 |
0.023 |
- Checked CR10X and CR23X systems.
-
Ted need replace Aspirator Fan on TNRH Floor Mat.
Tonzi_Floor Site
- Fence and gate were good. >12 v
- Panel and Batteries were working well: Battery 13.3v; Solar 2.1 apms; Load 2.6 apms.
- Download EC data: the RAW data is right under D:\. Siyan moved all of files from D:\Tonzi to D:\Tonzi_2004\Met and caused PC208W couldn’t find Gillsonic.exe which should be located at D:\Tonzi\. The lesson - Be more careful when move Met data from D:\Tonzi\ to D:\Tonzi_2004\. Only move the renamed files, which ends with .10X or .23X.
- Manually download data from CR23X3 and CR23X5. If the connection between Floor PC and data loggers is lost, one can unplug power line on each data logger and put it back. It usually works again.
- Reading from Gillsonic screen:
Time |
13:36:32 |
Path/File name |
Fl4_203.flx |
|
mean |
std |
|
mean |
std |
w |
0.21 |
3.22 |
Ts |
40.07 |
0.019 |
u |
0.22 |
0.717 |
H2O |
2.906 |
0.007 |
v |
1.35 |
1.064 |
CO2 |
1.423 |
0.008 |
- Moisture reading: (Soil is getting dry.)
|
Field Data
No tank data
No TZ Well data found
No TZ Moisture Point data found
No VR Moisture Point data found
No TZ grass heigth found
No VR grass heigth found
No TZ Tree DBH found
No water potential data found
No TZ Grass Biomass data found
No TZ OakLeaves Biomass data found
No TZ PineNeedles Biomass data found
0 photos found
16 sets found
No data found for TZ_Fenergy.
11 TZ_tmet graphs found
No data found for TZ_soilco2.
Can't check TZ_mixed
3 TZ_mixed graphs found
No data found for TZ_fflux.
8 TZ_fmet graphs found
No data found for TZ_tram.
No data found for TZ_co2prof.
No data found for TZ_irt.
1 TZ_windprof graphs found
No data found for TZ_tflux.
2 TZ_sm graphs found
Can't check TZ_met
1 TZ_met graphs found
Can't check TZVR_mixed
No data found for TZ_osu.
No data found for TZ_fd.
Tonzi Z-cam data
![plot of Tonzi z-cam LAI](drawzcamgraph.php?gid=raw&val=f_lai&days=4&setT=2004-07-21)
![plot of Tonzi z-cam gap fration](drawzcamgraph.php?gid=raw&val=f_gapfrac&days=4&setT=2004-07-21)