Equipment and Calibration
View History
Equipment Entry
|
Documents
Calibration: cal_KippZonen_PQS1_sn140453_20140909.pdfPackingSlip: ps_KippZonen_20151021.pdf
Report: Bouldin Corn - Radiometer Calibration 2021 - 2021-06-09
History
| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|---|---|---|---|---|
| 5093 | 2021-02-03 | Lab none | Installed | Bouldin Corn PAR Sensor Incoming | Reinstalled on the BC tower after cleaning and inspection in the lab after being removed after the tower fell last week |
| 5074 | 2021-01-29 | Bouldin Corn PAR Sensor Incoming | Removed | Lab none | Removed due to the tower falling over in the storm near midnight on 2021-01-26/27. Completely submerged |
| 4285 | 2019-12-13 | Lab none | Installed | Bouldin Corn PAR Sensor Incoming | Re-installed at Bouldin Corn in incoming position after re-assembling tower. |
| 4252 | 2019-12-02 | Bouldin Corn PAR Sensor Incoming | Removed | Lab none | Removed from Bouldin Corn site and brought back to the lab after the tower fell down during a rain/wind storm on 2019-11-26. |
| 2719 | 2017-04-26 | Lab none | Installed | Bouldin Corn PAR Sensor Incoming | Installed in the incoming position at the Bouldin Corn site with the initial set up of the tower. |
| 1976 | 2014-09-09 | Factory none | Calibration | Factory none | Initial factory calibration: 8.12 uV/(umol/m2/s), 470 Ohm: y=mx+b 123.2 0 |