Equipment and Calibration History
History for Kipp & Zonen PAR-LITE 010161
| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|---|---|---|---|---|
| 6533 | 2024-01-11 | Mayberry PAR Sensor Reflected Water | Removed | Lab none | Removed from MB tower because it was no longer measuring open water (wetland is filling in with cattails) |
| 4025 | 2019-07-25 | Lab none | Installed | Mayberry PAR Sensor Reflected Water | Installed at MB (PAR reflected water) to replace sn 040412, which was brought back to the lab for testing. |
| 4079 | 2019-06-18 | Lab none | Calibration | Lab none | New calibration factor of 5.32 uV/(umol/m2/s). Tested this sensor at Oxford Tract against AMP reference sensor K&Z PQS1 sn 161073. See RT Report "Oxford Tract Radiometer Comparison - 06/2018" for details. |
| 3765 | 2018-10-25 | Mayberry PAR Sensor Reflected Water | Removed | Lab none | Removed from MB (measuring reflected water) and brought back to the lab to replace the rotted cable and for calibration. It was replaced by sn 040412. |
| 327 | 2011-03-01 | Lab none | Installed | Mayberry PAR Sensor Reflected Water | Installed on the Mayberry tule tower to measure PAR relfected from open water. |
| 287 | 2011-02-03 | Tonzi | Removed | Lab none | Removed from the open space near the floor solar panels. |
| 102 | 2010-03-16 | Lab none | Installed | Tonzi | Installed at the request of Hideki in an unshaded opening near the east end of the radiation tram at Tonzi. This sensor is pointing upward collecting incoming PAR. |
| 4078 | 2001-07-26 | Factory | Calibration | Lab none | Initial factory calibration 5.27uV/umol/s.m2 |