| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|
| 7009 |
2024-11-04 |
Lab none |
Shipped |
Factory none |
Sent to Visala on quote Q-00284252, UPS tracking number 1Z0116959091064304 |
| 7008 |
2024-11-04 |
Lab none |
Tested |
Lab none |
I connected a DB9 connector white to pin 2, green to pin 3, and power to a lithium power pack, pink to +12V and gray to G and a spare brown wire between G and pin5 on the DB9. This allowed me to communicate with the probe via a serial terminal 19200,8,N,1. These are in POLL mode: ?? gets info, SEND id gets current reading, OPEN id put it in STOP MODE so you can issue ERRS to get error info. This one had E02 and E08 bad source, bad reading. Vaisala's web site has an automated repair quote process that had a flat repair fee for about $400 and a calibration fee of about $600. I'll send it for repair. |
| 6906 |
2024-10-10 |
Tonzi CO2 Probe Tower Profile 0.35 |
Removed |
Lab none |
Removed from the lowest position in the Tower CO2 profile. This sensor has bad CO2 readings. Occasionally restarting the sensor seemed to fix it but not this time. Need to check the data and test it in the lab. |
| 6580 |
2024-02-27 |
Lab none |
Installed |
Tonzi CO2 Probe Tower Profile 0.35 |
Reinstalled in the bottom location of the Tower co2 profile after testing in the lab. New cable. |
| 6560 |
2024-02-09 |
Tonzi CO2 Probe Tower Profile 0.35 |
Removed |
Lab none |
Removed from the lowest location on the Tower due to bad readings, cow chewed cable and to be calibrated |
| 3293 |
2018-01-15 |
Lab none |
Installed |
Tonzi |
Installed at the lowest location in the tower co2 profile - not running yet due to data logger failure. |
