| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|
| 6031 |
2022-10-07 |
Factory none |
Returned |
Lab none |
Returned from Stardot after inspection determined that a power surge on the ethernet port cooked the innards. Will use the lens on a new body |
| 5970 |
2022-08-29 |
Lab none |
Shipped |
Factory none |
Shipped back to StarDot for inspection/repair. The green LED in front comes on when the camera is plugged into power, but there is no network activity no matter how I try to physically connect it (through a router, through a switch, directly through a computer; with every combination of laptop ethernet port IP address/subnet). The only exception is if I connect it directly to a laptop with a crossover cable--the camera ethernet port does have a green light blinks every 3 seconds, but there are no changes to the green light (i.e., no network activity) even when I start StarDot Tools. It seemed to boot fine after a hard reset, but there was still no network activity. This camera was set to the default 192.168.2.101 IP address and connected fine in the lab in the past. The camera stopped working after bringing it back from Elkhorn Slough field trip in mid July. |
| 5937 |
2022-03-31 |
Mayberry |
Removed |
Lab none |
Removed from Mayberry with the end of the camera inter-comparison |
| 5316 |
2021-06-09 |
Lab none |
Installed |
Mayberry none |
Installed on wooden post below Canon camera for a camera intercomparison |
| 4700 |
2020-08-26 |
Bouldin Alfalfa Camera |
Removed |
Lab none |
Removed from Bouldin Alfalfa for upgrade of control scripts. Replaced by sn 0030F4D21525 |
| 3193 |
2016-11-03 |
Lab none |
Installed |
Bouldin Alfalfa Camera |
This Stardot camera was mounted on the Bouldin Alfalfa tower. It is facing NW off the north side of the tower scaffolding. It is currently mounted near the top of the railing due to a short cable. It will be moved to near the top of the post later. |
