Equipment and Calibration

View History

Equipment Entry

Instrument:PAR Sensor
Manufacture:Kipp & Zonen
Model No:PAR-LITE
Serial No:040411
Tag No:NULL
Acquisition Date:0000-00-00
Project:NSF-Methane
Location on 2023-09-18:Loaned, NULL
Notes: Cal coefficient 5.66 uV/(umol/m2/s), sensor is dead

Documents

Calibration: cal_KippZonen_PARLite_sn040411_20040529.pdf

History

Rec No.DateLoc FromTitleLoc ToNotes
6414 2023-09-18 Lab none Loaned Loaned none Loaned to Gracie Pearsall at UCSC for a informational display at Elkhorn Reserve
5772 2022-01-20 Lab none Damaged Lab none Brought to EE to install as part of the dfPAR set up, but killed the sensor when I accidentally wired its red/black wires into power
5659 2021-12-14 East End PAR Sensor Diffuse Removed Lab none Removed dfPAR apparatus because the motor was not working. I brought it back to the lab to replace the motor.
5624 2021-12-01 Lab none Installed East End PAR Sensor Diffuse Installed at EE on the southeast corner of the scaffolding as part of the diffuse PAR set up.
5607 2021-11-18 East End PAR Sensor Diffuse Removed Lab none Removed from the wooden 4x4 on the EE tower and brought back to the lab for inspection/repair. At least one of the cable splices is partly exposed and needs to be re-spliced.
3555 2018-07-05 Lab none Installed East End PAR Sensor Diffuse Installed with a rotating shadow band for diffuse PAR.
3518 2018-06-13 Twitchell Alfalfa PAR Sensor Diffuse Removed Lab none Removed with Twitchell Alfalfa site decommissioning.
1987 2015-10-15 Lab none Installed Twitchell Alfalfa PAR Sensor Diffuse This sensor was installed with a rotating shadow band to measure diffuse PAR. The CR1000 met program was updated appropriately.
1834 2015-05-12 Sherman Island PAR Sensor Incoming Removed Lab none Removed with the decommissioning of the Sherman Cow Pasture site.
43 2010-02-05 Sherman Island PAR Sensor Incoming Location Sherman Island PAR Sensor Incoming Collecting incoming PAR at Sherman. Cal coefficient 5.66
1747 2007-03-27 Lab none Installed Sherman Island PAR Sensor Incoming Installed on radiation boom in the upward position to measure incoming PAR