Equipment and Calibration

View History

Equipment Entry

Instrument:Data Logger
Manufacture:Campbell Sci.
Model No:CR1000
Serial No:50889
Tag No:
Acquisition Date:2012-10-02
Project:DOE-TCP
Location on 2021-03-11:Hill Slough,
Notes: Initial factory calibration 2012-09-28

Documents

No documents found

History

Rec No.DateLoc FromTitleLoc ToNotes
5181 2021-03-11 Lab none Installed Hill Slough Data Logger Met Installed at Hill Slough with site setup.
4955 2020-11-12 Sherman Wetland-Temp1 Data Logger Met Removed Lab none Removed with decommissioning of Sherman Wetland Temp tower. Brought back to the lab for cleanup.
4337 2020-01-30 East Pond Data Logger Moved Sherman Wetland-Temp1 Multiplexer Met Removed with the decommissioning of the EP tower and installed at the new SW Temporary site 1250m upwind of the Permanent Tower.
3868 2019-01-31 East Pond Data Logger Serviced East Pond Data Logger Changed Pakbus address from 1 to 89.
3418 2018-04-17 Lab none Installed East Pond Data Logger Installed at EP tower as part of initial site set up.
3226 2017-12-11 Lab none Upgrade Lab none Upgraded O.S. from version 27 to version 31.08 (CR1000.Std.31.08.obj). I enabled FTP with the usual username (Tower) and password.
3116 2017-10-04 East End-Temp3 Data Logger Met Removed Lab none Removed with the decommissioning of Temporary Tower #3 - Boardwalk site.
2874 2017-06-23 Lab none Installed East End-Temp3 Data Logger Met Installed at the East End Temporary Tower #3 Boardwalk location with the initial setup of the site.
2784 2017-05-24 Tonzi-Floor Removed Lab none Removed from the Tonzi Floor tower. Replaced by the new Licor GHG system from Ameriflux.
1683 2015-01-21 Tonzi-Floor Upgrade Tonzi-Floor I upgraded the OS from v25 to v27. OS v25 and above support CFM cards larger than 2GB.
811 2012-10-09 Lab none Installed Tonzi-Floor Installed with NL115 sn 9774 to collect flux data at the Floor tower in parallel with winflux. This data logger is in the box with the sonic PSU.