Equipment and Calibration History

History for Campbell Sci. CR1000 50889

Rec No.	Date	Loc From	Title	Loc To	Notes
5181	2021-03-11	Lab none	Installed	Hill Slough Data Logger Met	Installed at Hill Slough with site setup.
4955	2020-11-12	Sherman Wetland-Temp1 Data Logger Met	Removed	Lab none	Removed with decommissioning of Sherman Wetland Temp tower. Brought back to the lab for cleanup.
4337	2020-01-30	East Pond Data Logger	Moved	Sherman Wetland-Temp1 Multiplexer Met	Removed with the decommissioning of the EP tower and installed at the new SW Temporary site 1250m upwind of the Permanent Tower.
3868	2019-01-31	East Pond Data Logger	Serviced	East Pond Data Logger	Changed Pakbus address from 1 to 89.
3418	2018-04-17	Lab none	Installed	East Pond Data Logger	Installed at EP tower as part of initial site set up.
3226	2017-12-11	Lab none	Upgrade	Lab none	Upgraded O.S. from version 27 to version 31.08 (CR1000.Std.31.08.obj). I enabled FTP with the usual username (Tower) and password.
3116	2017-10-04	East End-Temp3 Data Logger Met	Removed	Lab none	Removed with the decommissioning of Temporary Tower #3 - Boardwalk site.
2874	2017-06-23	Lab none	Installed	East End-Temp3 Data Logger Met	Installed at the East End Temporary Tower #3 Boardwalk location with the initial setup of the site.
2784	2017-05-24	Tonzi-Floor	Removed	Lab none	Removed from the Tonzi Floor tower. Replaced by the new Licor GHG system from Ameriflux.
1683	2015-01-21	Tonzi-Floor	Upgrade	Tonzi-Floor	I upgraded the OS from v25 to v27. OS v25 and above support CFM cards larger than 2GB.
811	2012-10-09	Lab none	Installed	Tonzi-Floor	Installed with NL115 sn 9774 to collect flux data at the Floor tower in parallel with winflux. This data logger is in the box with the sonic PSU.