| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|
| 1526 |
2014-08-27 |
Twitchell Alfalfa |
Removed |
Lab none |
Removed from profile B at 2cm due to reading zero. Replaced by sn Y2009100. |
| 1864 |
2014-08-13 |
Lab none |
Installed |
Twitchell Alfalfa |
Installed near the radiometers at Alfalfa in Set B to the north at -2cm |
| 1303 |
2014-05-13 |
Lab none |
Installed |
Sherman Island |
Installed in Sherman Set B at -2cm to replace 1% probe sn Z2720011. This swap was to make all probes 3%. |
| 2089 |
2014-04-10 |
Sherman Island |
Removed |
Lab none |
Removed from Sherman profile A at -8cm, replaced with sn K1340007 |
| 1241 |
2014-01-29 |
Lab none |
Installed |
Sherman Island |
Reinstalled after lab calibration Set A at -8cm |
| 1429 |
2014-01-27 |
Lab none |
Calibration |
Lab none |
Trueppm = Probeppm*1.067 + -469.7; linear relationship between the ppm reported by the probe and the known ppm of the calibration tanks. Tanks: zero air (0ppm), 3056ppm, and 10000ppm. Ta=22.7C, P=102.1kPa. Because the lab conditions were close to factory conditions, no temperature or pressure corrections were applied. Done by: Patty. |
| 1184 |
2014-01-24 |
Tonzi CO2 Probe Tree2 Profile -0.02 |
Removed |
Lab none |
Removed from Tonzi tree #2 at -2cm for lab calibration |
| 1177 |
2012-03-02 |
Lab none |
Installed |
Tonzi CO2 Probe Tree2 Profile -0.02 |
Installed at Tonzi in the Tree2 set at -2cm |
| 1414 |
2012-02-15 |
Lab none |
Calibration |
Lab none |
Trueppm = Probeppm*1.08 + -386.4; linear relationship between the ppm reported by the probe and the known ppm of the calibration tanks. Tanks: zero air (0ppm), 436ppm, 2238ppm, and 10000ppm (N2 bal). Ta=26.7C, P=101.9kPa. Because the lab conditions were close to factory conditions, no temperature or pressure corrections were applied. Done by: Siyan. |
| 1392 |
2011-10-06 |
Lab none |
Calibration |
Lab none |
Trueppm = Probeppm*1.02 + -56.65; linear relationship between the ppm reported by the probe and the known ppm of the calibration tanks. Tanks: zero air (0ppm), 406ppm, 2238ppm, and 10000ppm (N2 bal). Ta=26.2C, P=101.4kPa. Because the lab conditions were close to factory conditions, no temperature or pressure corrections were applied. Done by: Sara. |
| 1386 |
2011-03-17 |
Lab none |
Calibration |
Lab none |
Trueppm = Probeppm*1.034 + 102.5; linear relationship between the ppm reported by the probe and the known ppm of the calibration tanks. Tanks: zero air (0ppm), 597ppm, 2238ppm, and 10000ppm (N2 bal). Ta=25.6C, P=102.6kPa. Because the lab conditions were close to factory conditions, no temperature or pressure corrections were applied. Done by: Melanie. |
| 1379 |
2011-02-07 |
Lab none |
Calibration |
Lab none |
Trueppm = Probeppm*1.048 + 150; linear relationship between the ppm reported by the probe and the known ppm of the calibration tanks. Tanks: zero air (0ppm), 597ppm, 2238ppm, and 10000ppm (N2 bal). Ta=25.8C, P=102.5kPa. Because the lab conditions were close to factory conditions, no temperature or pressure corrections were applied. Done by: Melanie. |
