Equipment and Calibration

Equipment Entry

Instrument:	Heat Flux Plate
Manufacture:	Hukseflux
Model No:	HFP01SC
Serial No:	00067
Tag No:
Acquisition Date:	1999-10-01
Project:
Location on 2013-04-24:	Tonzi, -3cm
Notes:	Self calibrating, Initial factory calibration: 58.4 uV/W/m2

No documents found

Rec No.	Date	Loc From	Title	Loc To	Notes
967	2013-04-24	Lab none	Installed	Tonzi-SoilCO2	Installed as SHF#2 on the soil CO2 CR23X and placed in the ground to the south of the data logger box
782	2012-09-10	Lab none	Repair	Lab none	I shortened the cable on this SFH plate. The cable had been spliced in the field where a large portion of it was tangled in the Tules and much longer than necessary.
777	2012-09-06	Mayberry Heat Flux Plate Water	Removed	Lab none	Reomved from the Tule Tower at Mayberry. SHF under a meter of water is questionable and these plates would be more useful else where. Removed to be calibrated and repurposed - not planning to replace.
331	2011-03-01	Lab none	installed	Mayberry Heat Flux Plate Water	Installed on the Mayberry tule tower measuring soil heat flux in water.
296	2011-02-03	Tonzi-Floor	Removed	Lab none	Removed from under the tree near the floor tower.
144	2010-06-24	Lab none	Installed	Tonzi-Floor	This sensor was installed near the under tree radiation sensor in the floor site.
143	2010-06-15	Lab none	Repair	Lab none	One of the wires was cut by animals. Spliced.
140	1999-09-09	Factory	Calibration	Factory	Initial factory calibration: 58.4 uV/W/m2 Heater resistance: 105.8 Ohm Heater area: 0.003885 m2