Equipment and Calibration History

History for TE Technology HP-127-1.0-1.3-71P P01

Rec No.	Date	Loc From	Title	Loc To	Notes
2225	2016-04-05	Lab none	Installed	Vaira	Reinstalled at Vaira in the Peltier SHF plate profile at -2cm after fixing broken wire in the lab.
2222	2016-03-23	Vaira	Removed	Lab none	Removed from Vaira at -2cm due to broken wire.
2129	2015-12-21	Lab none	Repair	Lab none	The red lead looked chewed and was broken at its junction to the plate. I soldered a new red wire directly to the junction and a new black wire about 3cm from the plate. Both wires were covered with heat shrink and the junctions to the plate were painted with black Rustoleum paint.
2105	2015-12-02	Vaira	Removed	Lab none	Removed from Vaira at -2cm. The red wire was broken not clear whether corrosion or animal (or shovel) damage
915	2013-02-06	Lab none	Installed	Vaira	Installed in a profile at -2cm to the east of the Vaira radiation tower
920	2013-01-16	Lab none	Calibration	Lab none	Calibrated by Sebastian at University of British Columbia: Multiplier = 99.54 (W/m2)/mV