Equipment and Calibration History

History for Campbell Sci. NL115 9774

Rec No.	Date	Loc From	Title	Loc To	Notes
5048	2016-08-12	Lab none	Installed	Bouldin Alfalfa none	Installed at BA with initial site set up
1102	2013-11-13	Factory	Returned	Lab none	Returned from Campbell. They replaced the bad eject button and updated the firmware. No charge - under warranty.
1087	2013-11-04	Lab none	Shipped	Factory	Sent to Campbell for a check on the non-functioning eject button on RMA 18887.
1086	2013-10-18	Tonzi-Floor	Removed	Lab none	Removed from the Floor Tower. The eject button was not giving a green light to eject the card and the files were getting corrupted on a forced eject. I brought the module in for testing. Replace by sn 6761
809	2012-10-09	Lab none	Installed	Tonzi-Floor	Installed with CR1000 sn 50889 to collect flux data at the Floor tower in parallel with winflux. This interface is in the box with the sonic PSU.