|
|
Equipment and CalibrationView History
Equipment Entry
Instrument: | Interface |
Manufacture: | Campbell Sci. |
Model No: | NL115 |
Serial No: | 9774 |
Tag No: | |
Acquisition Date: | 2012-10-02 |
Project: | DOE-TCP |
Location on 2016-08-12: | Bouldin Alfalfa, |
Notes: |
|
|
|
Documents
No documents found
History
Rec No. | Date | Loc From | Title | Loc To | Notes |
5048 |
2016-08-12 |
Lab none |
Installed |
Bouldin Alfalfa none |
Installed at BA with initial site set up |
1102 |
2013-11-13 |
Factory |
Returned |
Lab none |
Returned from Campbell. They replaced the bad eject button and updated the firmware. No charge - under warranty. |
1087 |
2013-11-04 |
Lab none |
Shipped |
Factory |
Sent to Campbell for a check on the non-functioning eject button on RMA 18887. |
1086 |
2013-10-18 |
Tonzi-Floor |
Removed |
Lab none |
Removed from the Floor Tower. The eject button was not giving a green light to eject the card and the files were getting corrupted on a forced eject. I brought the module in for testing. Replace by sn 6761 |
809 |
2012-10-09 |
Lab none |
Installed |
Tonzi-Floor |
Installed with CR1000 sn 50889 to collect flux data at the Floor tower in parallel with winflux. This interface is in the box with the sonic PSU. |
|
|
|