Equipment and Calibration

Equipment Entry

Instrument:	Heat Flux Plate
Manufacture:	Hukseflux
Model No:	HFP01SC
Serial No:	00068
Tag No:
Acquisition Date:	1999-10-01
Project:	DOE-TCP
Location on 2024-03-07:	Tonzi,
Notes:	Initial factory calibration: 61.1 uV/W/m2

No documents found

Rec No.	Date	Loc From	Title	Loc To	Notes
6611	2024-03-07	Tonzi Heat Flux Plate D	Moved	Tonzi Heat Flux Plate D	I moved this plate back down to -10cm where I found it before fixing its cable a couple weeks ago.
6601	2024-02-16	Tonzi Heat Flux Plate D	Maintenance	Tonzi Heat Flux Plate D	I dug this plate up. It was at about -10cm with voids below the plate. I soldered on a new cable amd cut off the calibration cable because the insulation on both was completely rotten. I put it back at -2cm.
5987	2001-01-05	Lab none	Installed	Tonzi Heat Flux Plate D	Likely first installation date and location estimated from notes and data.
141	1999-09-09	Factory	Calibration	Factory	Initial factory calibration: 61.1 uV/W/m2 Heater resistance: 105.0 Ohm Heater area: 0.003885 m2