Equipment and Calibration History
History for Hukseflux HFP01SC 00068
| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|---|---|---|---|---|
| 6611 | 2024-03-07 | Tonzi Heat Flux Plate D | Moved | Tonzi Heat Flux Plate D | I moved this plate back down to -10cm where I found it before fixing its cable a couple weeks ago. |
| 6601 | 2024-02-16 | Tonzi Heat Flux Plate D | Maintenance | Tonzi Heat Flux Plate D | I dug this plate up. It was at about -10cm with voids below the plate. I soldered on a new cable amd cut off the calibration cable because the insulation on both was completely rotten. I put it back at -2cm. |
| 5987 | 2001-01-05 | Lab none | Installed | Tonzi Heat Flux Plate D | Likely first installation date and location estimated from notes and data. |
| 141 | 1999-09-09 | Factory | Calibration | Factory | Initial factory calibration: 61.1 uV/W/m2
Heater resistance: 105.0 Ohm Heater area: 0.003885 m2 |