Equipment and Calibration History
History for Kipp & Zonen CMP 11 996981
| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|---|---|---|---|---|
| 6355 | 2023-08-03 | Lab none | Repair | Lab none | I took this pyranometer apart and soldered a new short cable to the contacts on the bottom side of the sensor. The wiring colors are the same: red+, blue-, shield. There was a white wire that doesn't seem to be used which I replaced with a yellow so that it is accessible outside the case. It needs new desiccant and probably a longer wire spliced on to be used on a tower. There is a scratch on the outer dome and it needs an inter-comparison. |
| 3001 | 2017-08-25 | Tonzi-Tower | Removed | Lab none | Removed from Tonzi Tower and brought back to the lab. It is a redundant measurement with the 4-way radiometer. Cables are decayed and need to be replaced. |
| 325 | 2001-05-20 | Lab none | Installed | Tonzi-Tower | Installed on the top of Tonzi Tower. [Gleaned from notes] |