Equipment and Calibration
View History
Equipment Entry
| Instrument: | Narrow Band |
| Manufacture: | Apogee |
| Model No: | S2-411 |
| Serial No: | 1054 |
| Tag No: | |
| Acquisition Date: | 2020-06-22 |
| Project: | CDFW |
| Location on 2022-09-12: | Lab, |
| Notes: |
Red and NIR for NDVI, in a one-window housing (probably from the red/far-red sensor).
Firmware version = ? |
|
|
Documents
No documents found
Report: East End - NDVI (SRS, Apogee, Planet) - 2017-06-07
History
| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|
| 5983 |
2022-09-12 |
Lab none |
Tested |
Lab none |
Plugged in to a CR1000 in the lab but 650out is still bad. It's stuck at about -3.7. |
| 5976 |
2022-08-30 |
East End Narrow Band NDVI Reflected B |
Removed |
Lab none |
Removed from EE and brought back to the lab for testing. 650out data is bad. |
| 5228 |
2021-03-30 |
Lab none |
Installed |
East End Narrow Band NDVI Reflected B |
Installed at EE on radiation boom in outoing position |
| 5165 |
2021-03-04 |
East End Narrow Band NDVI Reflected B |
Removed |
Lab none |
Removed from East End and brought back to the lab for testing. It had some NANs, but might've been influenced by the misbehaving NDVI_in sensor that was wired to the same control port. |
| 4664 |
2020-08-05 |
Lab none |
Installed |
East End Narrow Band NDVI Reflected B |
Installed at EE in the NDVI outgoing position |
| 4621 |
2020-07-15 |
Lab none |
Initial settings |
Lab none |
Set up as SDI-12 address H for NDVIout |
