Equipment and Calibration
View History
Equipment Entry
Instrument: | Water Level |
Manufacture: | Global Water |
Model No: | WL16U |
Serial No: | 57278 |
Tag No: | NULL |
Acquisition Date: | 2007-04-30 |
Project: | NULL |
Location on 2018-05-11: | Tonzi, NULL |
Notes: |
0-15' water level range, 40 foot vented cable |
|
|
Documents
No documents found
Report: Tonzi Floor well sensor comparison - 2018-03-27
History
Rec No. | Date | Loc From | Title | Loc To | Notes |
5084 |
2018-05-11 |
Lab none |
Installed |
Tonzi Water Level Road |
Installed at the Road Well to measure water level at 5min intervals storing 30min averages |
5087 |
2018-05-08 |
Lab none |
Repair |
Lab none |
I stripped off the old rotting insulation and then slid on a long continuous piece of heat shrink. I shrunk the whole length of the cable. I disassembled the data logging enclosure and kept only the data logger board and USB connector in the end cap. I cut off the twin 9V battery plugs and will power the sensor from solar connected rechargeable battery. |
5086 |
2018-03-27 |
Tonzi Water Level Floor |
Removed |
Lab none |
Removed from the Floor Well. The cable insulation is rotting and needs to be replaced. Replaced by the new METER water level sensor a couple of weeks ago. |