Equipment and Calibration
View History
Equipment Entry
| Instrument: | CO2 Probe |
| Manufacture: | Forerunner-Eosense |
| Model No: | GP-001 |
| Serial No: | GP20150101 |
| Tag No: | |
| Acquisition Date: | 2015-12-07 |
| Project: | CDFW |
| Location on 2020-10-08: | Factory, |
| Notes: |
0-2% probe |
|
|
Documents
No documents found
Report: Eosense CO2 Probe Compare - 2018-04-23
Report: Eosense CO2 Probe Compare - 2018-09-07
History
| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|
| 4861 |
2020-10-08 |
Lab none |
Shipped |
Factory none |
Sent to Eosense for inspection |
| 4036 |
2019-08-05 |
Lab none |
Tested |
Lab none |
This probe is bad - reading 5000 mV consistently. Tested in the lab against 2 new 1% probes in Joe's test chamber (blew into chamber and let it come down to ambient). |
| 4013 |
2019-07-10 |
East End CO2 probe |
Removed |
Lab none |
Removed from EE and brought back to the lab for further testing (it was maxing out, even when out of the water). |
| 4012 |
2019-01-18 |
Lab none |
Installed |
East End CO2 probe |
Installed at EE to replace sn GP20140019, which was brought back to the lab for testing. |
| 3040 |
2017-08-16 |
Sherman Wetland CO2 Probe |
Removed |
Lab none |
Removed from SW because it did not have a waterproof sensor-cable connection. |
| 2305 |
2016-05-24 |
Lab none |
Installed |
Sherman Wetland CO2 Probe |
Installed on the Sherman Wetland tower at the initial set up of the site. In the air unil the site is flooded. |
