Equipment and Calibration History
History for Forerunner-Eosense GP-001 GP20150101
| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|---|---|---|---|---|
| 4861 | 2020-10-08 | Lab none | Shipped | Factory none | Sent to Eosense for inspection |
| 4036 | 2019-08-05 | Lab none | Tested | Lab none | This probe is bad - reading 5000 mV consistently. Tested in the lab against 2 new 1% probes in Joe's test chamber (blew into chamber and let it come down to ambient). |
| 4013 | 2019-07-10 | East End CO2 probe | Removed | Lab none | Removed from EE and brought back to the lab for further testing (it was maxing out, even when out of the water). |
| 4012 | 2019-01-18 | Lab none | Installed | East End CO2 probe | Installed at EE to replace sn GP20140019, which was brought back to the lab for testing. |
| 3040 | 2017-08-16 | Sherman Wetland CO2 Probe | Removed | Lab none | Removed from SW because it did not have a waterproof sensor-cable connection. |
| 2305 | 2016-05-24 | Lab none | Installed | Sherman Wetland CO2 Probe | Installed on the Sherman Wetland tower at the initial set up of the site. In the air unil the site is flooded. |