Equipment and Calibration

View History

Equipment Entry

Instrument: Pyranometer Manufacture: Kipp & Zonen Model No: CMP 11 Serial No: 996981 Tag No: Acquisition Date: 1999-09-07 Project: DOE-TCP Location on 2023-08-03: Lab, 23m Notes: Initial factory calibration: 5.03 uV/(W/m2)

Documents

Calibration: cal_KippZonen_CM11_sn996981_19990907.pdf

History

Rec No.	Date	Loc From	Title	Loc To	Notes
6355	2023-08-03	Lab none	Repair	Lab none	I took this pyranometer apart and soldered a new short cable to the contacts on the bottom side of the sensor. The wiring colors are the same: red+, blue-, shield. There was a white wire that doesn't seem to be used which I replaced with a yellow so that it is accessible outside the case. It needs new desiccant and probably a longer wire spliced on to be used on a tower. There is a scratch on the outer dome and it needs an inter-comparison.
3001	2017-08-25	Tonzi-Tower	Removed	Lab none	Removed from Tonzi Tower and brought back to the lab. It is a redundant measurement with the 4-way radiometer. Cables are decayed and need to be replaced.
325	2001-05-20	Lab none	Installed	Tonzi-Tower	Installed on the top of Tonzi Tower. [Gleaned from notes]