Equipment and Calibration

Equipment Entry

No documents found

Rec No.	Date	Loc From	Title	Loc To	Notes
5430	2021-08-30	Borrowed none	Returned	Lab none	Returned by Sarah Daniel from LBL FLEXLAB. This is the final item returned.
4475	2020-05-22	Lab none	Loaned	Loaned none	Loaned to Rod Mobini <rmobini@lbl.gov> at LBL FLEXLAB for an experiment on the indoor spread of droplets related to COVID-19 over the summer. The sonic was cleaned and tested okay in the lab. The settings were standardized to: B3 = 9600 baud E1 = Full duplex F1 = 8 data, no parity G1 = No averaging J2 = Two differential inputs J5 = Zero single ended inputs L1 = <cr><lf> M1 = UVW ASCII message NA = Name 'A' O1 = comma separated P6 = 10Hz U1 = m/s Z1 = Not used X1 = align to axis
1853	2015-05-12	Sherman Island Anemometer	Removed	Lab none	Removed with the decommissioning of the Sherman Cow Pasture site.
53	2010-02-05	Factory	Calibration	Factory	Initially factory calibration. Certificate on record.
51	2006-09-28	Factory	Repair	Factory	Tested to spec, repaired A/D converter, checked output for spikes
52	2006-02-09	Factory	Repair	Factory	Tested to spec with PCI sn00200
4825	2002-04-11	Tonzi-Tower Anemometer Tower	Removed	Lab none	Removed from Tonzi-Tower for calibration. Replaced by sn 000022.
2100	2001-07-02	Lab none	Installed	Tonzi-Tower	Installed on the Tonzi Tower to replace existing sonic that has had suspicious performance.