Equipment and Calibration History

History for Gill WMP 1352 000020

Rec No.DateLoc FromTitleLoc ToNotes
5430 2021-08-30 Borrowed none Returned Lab none Returned by Sarah Daniel from LBL FLEXLAB. This is the final item returned.
4475 2020-05-22 Lab none Loaned Loaned none Loaned to Rod Mobini <rmobini@lbl.gov> at LBL FLEXLAB for an experiment on the indoor spread of droplets related to COVID-19 over the summer. The sonic was cleaned and tested okay in the lab. The settings were standardized to: B3 = 9600 baud
E1 = Full duplex
F1 = 8 data, no parity
G1 = No averaging
J2 = Two differential inputs
J5 = Zero single ended inputs
L1 = <cr><lf>
M1 = UVW ASCII message
NA = Name 'A'
O1 = comma separated
P6 = 10Hz
U1 = m/s
Z1 = Not used
X1 = align to axis
1853 2015-05-12 Sherman Island Anemometer Removed Lab none Removed with the decommissioning of the Sherman Cow Pasture site.
53 2010-02-05 Factory Calibration Factory Initially factory calibration. Certificate on record.
51 2006-09-28 Factory Repair Factory Tested to spec, repaired A/D converter, checked output for spikes
52 2006-02-09 Factory Repair Factory Tested to spec with PCI sn00200
4825 2002-04-11 Tonzi-Tower Anemometer Tower Removed Lab none Removed from Tonzi-Tower for calibration. Replaced by sn 000022.
2100 2001-07-02 Lab none Installed Tonzi-Tower Installed on the Tonzi Tower to replace existing sonic that has had suspicious performance.