|
|
Equipment and CalibrationView History
Equipment Entry
Instrument: | Infrared Temperature |
Manufacture: | Apogee |
Model No: | SI-121 |
Serial No: | 1965 |
Tag No: | NULL |
Acquisition Date: | 2015-04-22 |
Project: | Ameriflux |
Location on 2024-04-30: | Lab, NULL |
Notes: |
Replacing old SA-121 sensor that was traded in. Narrow field of view 18deg half-angle, 0.6sec response time, analog outs.
Coefficients:
mC2 = 1.08768e5
mC1 = 1.05487e7
mC0 = 1.82939e9
bC2 = 2.63346e3
bC1 = 1.75985e5
bC2 = -4.94396e6 |
|
|
Documents
Calibration: cal_Apogee_SI-121_1965.pdf
History
Rec No. | Date | Loc From | Title | Loc To | Notes |
6692 |
2024-04-30 |
Lab none |
Repair |
Lab none |
I spliced this cable back together where the cow chewed it. The end has a completion resister for the thermistor half bridge. A quick test in the lab window shows it matches the other IRT within 0.5C - as good as you get without a fancier setup. |
6683 |
2024-04-22 |
Tonzi Infrared Temperature Tree Crown |
Removed |
Lab none |
Removed from the IRT tripod because cows had chewed the wires off. |
1806 |
2015-05-06 |
Lab none |
Installed |
Tonzi Infrared Temperature Tree Crown |
Installed at Tonzi to the east just north of the road. This sensor is point down on top of a small tree. |
|
|
|