|
|
|
Equipment and CalibrationView History
Equipment Entry
| Instrument: | Heat Flux Plate |
| Manufacture: | Hukseflux |
| Model No: | HFP01 |
| Serial No: | 000138 |
| Tag No: | |
| Acquisition Date: | 1999-10-01 |
| Project: | DOE-TCP |
| Location on 2024-03-07: | Tonzi, |
| Notes: |
Initial factory calibration: 58.9 uV/W/m2. Located near the Tower. |
|
|
Documents
No documents found
History
| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|
| 6610 |
2024-03-07 |
Tonzi Heat Flux Plate A |
Maintenance |
Tonzi Heat Flux Plate A |
We dug this plate up to replace its cable that had all its insulation rotted off. The plate was 2-5cm below the surface – it was tilted and ground surface was not very flat. We put it back flat at 3cm and the new cable in conduit. |
| 5990 |
2001-01-05 |
Lab none |
Installed |
Tonzi Heat Flux Plate A |
Likely first installation date and location estimated from notes and data. |
| 133 |
1999-09-09 |
Factory |
Calibration |
Factory |
Initial factory calibration: 58.9 uV/W/m2 |
|
|
|
