Equipment and Calibration History
History for Gill WMP 1352 000021
| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|---|---|---|---|---|
| 5360 | 2021-07-06 | Borrowed none | Returned | Lab none | Returned from FLEXLAB at LBL by Hershow Al-Barazi - Cable to be returned later hopefully. |
| 4476 | 2020-05-22 | Lab none | Loaned | Loaned none | Loaned to Rod Mobini <rmobini@lbl.gov> at LBL FLEXLAB for an experiment on the indoor spread of droplets related to COVID-19 over the summer. The sonic was cleaned and tested okay in the lab. The settings were standardized to: B3 = 9600 baud E1 = Full duplex F1 = 8 data, no parity G1 = No averaging J2 = Two differential inputs J5 = Zero single ended inputs L1 = <cr><lf> M1 = UVW ASCII message NA = Name 'A' O1 = comma separated P6 = 10Hz U1 = m/s Z1 = Not used X1 = align to axis |
| 4157 | 2019-11-18 | Loaned | Returned | Lab none | This sensor was returned from Whendee's lab some time ago but no note was entered at the time. I have confirmed it is currently of the shelf above Daphne's desk in the lab. |
| 2546 | 2016-10-25 | Lab none | Loaned | Loaned | Loaned to Sam in Whendee Silver's lab. |
| 1800 | 2015-04-29 | Tonzi-Tower | Removed | Lab none | Removed from the Tonzi Tower due to repeated serial stream outages. Replaced by sn 000019. |
| 4755 | 2014-04-08 | Tonzi-Tower Anemometer Tower | Location | Tonzi-Tower Anemometer Tower | Current location of this instrument and probably back to before 2008 |
| 4753 | 2004-11-02 | Lab none | Installed | Tonzi-Tower Anemometer Tower | Installed on Tonzi Tower after being freshly tested replacing sn 000022 |
| 4892 | 2003-01-07 | Tonzi-Floor Anemometer Floor | Removed | Lab none | Removed from Tonzi-Floor. Replaced by sn 000019. |
| 4831 | 2002-04-18 | Tonzi-Floor Anemometer Floor | Location | Tonzi-Floor Anemometer Floor | Location noted in fieldnotes |