Equipment and Calibration History
History for Kipp & Zonen PQS 1 110337
| Rec No. | Date | Loc From | Title | Loc To | Notes |
|---|---|---|---|---|---|
| 1709 | 2015-01-20 | Lab none | Installed | East End PAR Sensor Reflected | Reinstalled after being removed when the scaffolding fell over. This sensor is pointing down and measuring PARout. |
| 1694 | 2015-01-05 | East End PAR Sensor Incoming | Removed | Lab none | Removed from the site due to the tower falling over in the wind on 2014-12-30. Likely undamaged. |
| 1152 | 2013-11-25 | DWR Corn PAR Sensor Outgoing | Moved | East End PAR Sensor Incoming | This sensor was moved from the DWR Corn construction tower to the new East End tower and installed in the incoming position because the cable of the incoming PAR sensor was cut. |
| 652 | 2012-06-21 | Lab none | Installed | DWR Corn | This sensor was installed in the downward facing position on a folding boom on the top northeast corner of the tower and extending to the east. It had a longer cable spliced on to it and replaced sn 110339. |
| 4450 | 2011-11-18 | Factory none | Calibration | Factory none | Initial factory calibration 4.51uV/(umol/m2/s) |