Equipment and Calibration

Equipment Entry

Instrument:	Data Logger
Manufacture:	Campbell Sci.
Model No:	CR10X
Serial No:	3501
Tag No:
Acquisition Date:	2019-09-12
Project:	Harte Lab
Location on 2024-10-29:	Tonzi,
Notes:	Recovered from the decommissioning of the Harte Lab. Bare silver box. I put it in wiring panel sn 28250 from a dead CR10x.

No documents found

Rec No.	Date	Loc From	Title	Loc To	Notes
6980	2024-10-29	Lab none	Installed	Tonzi Data Logger StemFlux West	Installed west of the Floor tower to measure tree trunk temperatures for Kuno's stem flux experiment
6950	2024-10-23	Gilbert Tract	Removed	Lab none	Removed from "Southside" station in Gilbert Tract at the conclusion of Robert's thermocouple experiment
6858	2024-09-19	Lab none	Installed	Gilbert Tract none	Installed at the Gilbert Tract "southside" station for Robert's temperature campaign
6887	2024-09-16	Lab none	Tested	Lab none	Tested in the lab for possible use at GT. The clock was ok, the OS is v 23 and the internal battery was 3.07V. Good to go.
6472	2023-11-14	Lab none	Maintenance	Lab none	Put in a new internal lithium battery and testing in the lab. May use this datalogger for the PAR/RNET sensors on the BWW roof because I was having trouble connecting to the Goldstein lab CR10X.
4112	2019-09-27	Lab none	Upgrade	Lab none	I upgraded the OS from v4 to v23. All seems well. The internal lithium battery is dead and needs to be replaced before deployment.