Equipment and Calibration

View History

Equipment Entry

Instrument: CO2 Probe Manufacture: Forerunner-Eosense Model No: GP-001 Serial No: GP20140016 Tag No: NULL Acquisition Date: 2017-05-31 Project: NULL Location on 2020-10-08: Factory, NULL Notes: Provided by Eosense to replace one of the 8 sensors they disposed of at the factory. dual range 0-2% and 0-6%

Documents

Calibration: cal_Eosense_GP-001_snVarious_20170526.pdf

History

Rec No.	Date	Loc From	Title	Loc To	Notes
4860	2020-10-08	Lab none	Shipped	Factory none	Sent to Eosense for inspection
3795	2018-11-06	Lab none	Tested	Lab none	Connected to a CR6 and recorded 10s data. The sensor was maxing out (reading ~5V) on both 0-2% and 0-6% ranges. The connection between sensor and cable seemed secure and clean. The sensor should go back to the factory.
3751	2018-10-18	Sherman Wetland CO2 Probe	Removed	Lab none	Removed from Sherman Wetland due to railed readings not responding the atmospheric CO2.
3041	2017-08-16	Lab none	Installed	Sherman Wetland CO2 Probe	Installed at SW. I waterproofed the cable-sensor connection with multiple layers of liquid electrical tape and silicone caulk.