Rec No. | Date | Loc From | Title | Loc To | Notes |
2807 |
2017-05-31 |
Factory |
Disposed |
Disposed |
Disposed of at Eosense factory because it was not repairable |
2669 |
2017-03-20 |
Lab none |
Shipped |
Factory |
Sent to Eosense for evaluation. Failed after a total 364 days in use. |
1943 |
2015-09-23 |
Lab none |
Disposed |
Disposed |
The connector on this probe was completely fused by corrosion and broke off when I tried to disconnect it. I'll put it in the damaged sensor box in the lab. |
1896 |
2015-06-25 |
Mayberry CO2 Probe A |
Removed |
Lab none |
Removed from the top location at Mayberry due to corroding connector. Could not disconnect the cable, so removed cable too. |
4405 |
2014-10-16 |
Mayberry CO2 Probe A |
Moved |
Mayberry CO2 Probe A |
Moved lower on fence post from -5cm (based on water level on 2014-06-26) to -25cm (based on water level on 2014-10-16). |
1611 |
2014-06-26 |
Lab none |
Installed |
Mayberry CO2 Probe A |
Installed about 5cm below the surface on the fence post in the open water channel. |