Equipment and Calibration History

History for Gill WMP 1352 000021

Rec No.	Date	Loc From	Title	Loc To	Notes
5360	2021-07-06	Borrowed none	Returned	Lab none	Returned from FLEXLAB at LBL by Hershow Al-Barazi - Cable to be returned later hopefully.
4476	2020-05-22	Lab none	Loaned	Loaned none	Loaned to Rod Mobini <rmobini@lbl.gov> at LBL FLEXLAB for an experiment on the indoor spread of droplets related to COVID-19 over the summer. The sonic was cleaned and tested okay in the lab. The settings were standardized to: B3 = 9600 baud E1 = Full duplex F1 = 8 data, no parity G1 = No averaging J2 = Two differential inputs J5 = Zero single ended inputs L1 = <cr><lf> M1 = UVW ASCII message NA = Name 'A' O1 = comma separated P6 = 10Hz U1 = m/s Z1 = Not used X1 = align to axis
4157	2019-11-18	Loaned	Returned	Lab none	This sensor was returned from Whendee's lab some time ago but no note was entered at the time. I have confirmed it is currently of the shelf above Daphne's desk in the lab.
2546	2016-10-25	Lab none	Loaned	Loaned	Loaned to Sam in Whendee Silver's lab.
1800	2015-04-29	Tonzi-Tower	Removed	Lab none	Removed from the Tonzi Tower due to repeated serial stream outages. Replaced by sn 000019.
4755	2014-04-08	Tonzi-Tower Anemometer Tower	Location	Tonzi-Tower Anemometer Tower	Current location of this instrument and probably back to before 2008
4753	2004-11-02	Lab none	Installed	Tonzi-Tower Anemometer Tower	Installed on Tonzi Tower after being freshly tested replacing sn 000022
4892	2003-01-07	Tonzi-Floor Anemometer Floor	Removed	Lab none	Removed from Tonzi-Floor. Replaced by sn 000019.
4831	2002-04-18	Tonzi-Floor Anemometer Floor	Location	Tonzi-Floor Anemometer Floor	Location noted in fieldnotes