Equipment and Calibration History
View Equipment |
| Date: |
2017-01-25 |
| From: |
Lab - none |
| To: |
Lab - none |
| Title: |
Upgrade |
| Notes: |
Upgraded firmware to correct for W bug.
Old SN: Y153804
New SN: X153804
Upgrade file: Y074417-Y124215-m.gcu
Old firmware: 2329-601-03
New firmware: 2329-701-01
All Checksum fields report PASS.
Log file: .txt
Config file below. If there are two entries in a field, the first entry is the old setting and the second entry is the new setting.
-------
THE FOLLOWING FIELDS HAVE CHANGED
Output rate : P1 1 Hz
Output rate : P8 20 Hz
THE NEW CONFIGURATION IN FULL
==== DETAILS OF DETECTED ANEMOMETER ========================
Serial Number : X153804
---- SW VERSION--------------------------------------------
Anemometer Firmware Version: 2329-701
---- HW DETAILS OF ANEMOMETER------------------------------
Detected Anemometer Class : WindMaster 20Mhz
Number of AXIS on this unit : 3
DAC resolution of attached unit : 14
Number of DAC channels : 4
Maximum sampling rate : (8) P8 20 Hz
---- USER CONFIGURATION OF ANEMOMETER----------------------
Baud Rate : 19200
Output Message Format : M1 UV(W)
Output Message Velocity Units : m/s
Output Message Terminator :
Retries : ON
Instantaneous Sampling : OFF
Factory Calibration : ON
Physical Communications : Auto
Resolution settings : High resolution
Alignment settings : North to spar
Averaging settings : Averaging inactive
Output rate : P1 1 Hz
Output rate : P8 20 Hz
Polar angle minimum magnitude: 0.050 m/s
Power-On Message : Display Power On Message
ASCII Format : Comma Separated (CSV)
SOS and Sonic Temperature display : SOS
Analogue output mode : -5V to 5V
Unit Identifier : 'Q'
Output Channel 1 : U output (full range = 30m/s)
Output Channel 2 : V output (full range = 30m/s)
Output Channel 3 : W output (full range = 5m/s)
Output Channel 4 : Speed of Sound
Synchronised Polling : Off
|
| Entered by: |
Daphne Szutu |
|
|
