Equipment and Calibration History
View Equipment |
| Date: |
2023-01-25 |
| From: |
Lab - none |
| To: |
Disposed - none |
| Title: |
Tested |
| Notes: |
Removed the spliced cable and tested in the lab. Still no response on the terminal emulator. This sensor is probably dead. It's weird that both incoming and outgoing sensors went bad at the the same time. Both sensors had spliced cables and were connected to the same C port and the same pluggable power block. One of the spliced wires for data (red) had a few cracks in the plastic sheath; maybe it shorted against the bare G wire and killed both sensors. |
| Entered by: |
Daphne Szutu |
|
|
