| Date: |
2014-08-21 |
| From: |
Lab - none |
| To: |
Lab - none |
| Title: |
Tested |
| Notes: |
I tried to install this sensor on the Tonzi Tower. This is a SDI-12 sensor and the 23x was having trouble reading it. This might be due to a default SDI-12 address of 0 (zero). I could not change the address with the 23x terminal in SDI-12 transparent mode, so I brought it back to the lab. |
| Entered by: |
Joe Verfaillie |
|
|
