Equipment and Calibration

Equipment history at Mayberry

| ALL | | Anemometer || Barometer || Battery Bank || Camera || CH4 Probe || CO2 Probe || CO2 Transmitter || Conductivity Sensor || Data Logger || DO Sensor || Fluorometer || Forced Diffusion || Gas Analyzer || Heat Flux Plate || Infrared Temperature || Interface || LED sensor || Multiplexer || Narrow Band || Net Radiometer || PAR Sensor || Precipitation || Range Finder || RH & Temp || Soil Moisture Probe || Solar Controller || Solar Panel || Water Level |

SELECT a.recno, a.eh_date, a.eh_loc1, a.eh_loc2, IF(a.eh_loc2=:loc, a.eh_locref2, a.eh_locref1) AS ref, a.eh_locref2, a.eh_title, a.eh_notes, a.eh_id, b.serialno, b.equip, b.modelno FROM equiphist a INNER JOIN equiplist b ON a.eh_id=b.recno WHERE (a.eh_loc1=:loc1 OR a.eh_loc2=:loc2) AND b.equip=:eq ORDER BY b.serialno, a.eh_date

Date Serial No. Model Action Ref Notes
Range Finder
2025-01-15 68574-2 MB7389-100 Installed Range Finder water Installed to replace the existing sensor. Hopefully this one will have better quality data. We might have killed it with 12V instead of 5V.
2025-01-29 68574-2 MB7389-100 Removed Range Finder water Removed from the tower because it was killed with 12V instead of 5V last time.
2025-01-29 68574-4 MB7389-100 Installed Range Finder water Installed to replace the one killed with 12V instead of 5V last time.
2019-04-25 URM06-002 URM06 Installed Installed on the Mayberry Tower on a short arm off the center-east side about 68cm above the water level.
2025-01-15 URM06-002 URM06 Removed Range Finder water Removed from the tower for a newer maybe better one. The water level range data from this sensor is a bit noisy but useful for gap filling.
Export to BADM